bannerd

A. Introduction

B. Institutional Requirements

C. Project Software Requirements

D. Topics

E. Tools, References, and Terms

F. SPAN
(NASA Only)

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 13 Next »

This is a working page to build the list of activities and the SWEs and topics that define them. 

Activity NameSWEsRelated Topics

Benchmarking and Appraisals

3.9 Software Development
Processes and Practices

SWE-004 - OCE Benchmarking

SWE-129 - OCE NPR Appraisals

SWE-209 - Benchmarking Software Assurance
and Software Safety Capabilities

SWE-221 - OSMA NPR Appraisals

8.12 - Basics of Software Auditing

Licensing, Sharing and Reuse

Also see 3.10 Software Reuse

SWE-215 - Software License Rights

SWE-216 - Internal Software Sharing List

SWE-217 - List of All Contributors and Disclaimer Notice

SWE-214 - Internal Software Sharing and Reuse

SWE-218 - Contracting Officers

8.8 - COTS Software Safety Considerations

Measurements and Metrics

Also see 5.4 Software Measurements

SWE-091 - Establish and Maintain Measurement Repository

SWE-092 - Using Measurement Data

SWE-142 - Software Cost Repositories

7.14 - Implementing Measurement Requirements and Analysis for Projects

7.18 - Metrics - Software Metrics Report

Process Definition

SWE-002 - Software Engineering Initiative

SWE-208 - Advancing Software Assurance and Software Safety Practices

SWE-003 - Center Improvement Plans

SWE-005 - Software Processes

SWE-095 - Report Engineering Discipline Status

SWE-006 - Center Software Inventory

7.1 - History and Overview of the Software Process Improvement (SPI) Effort


Process Library

SWE-098 - Agency Process Asset Library

SWE-144 - Software Engineering Process Assets

SWE-153 - ETA Define Document Content


Requirement Mapping, Tailoring,
and Classification

Also see 3.5 Software Classification
Assessments 

SWE-152 - Review Requirements Mapping Matrices

SWE-212 - NASA-STD-8739 Mapping Matrices

SWE-223 - Tailoring IV&V project selections

SWE-140 - Comply with Requirements

SWE-126 - Tailoring Considerations

SWE-150 - Review Changes To Tailored Requirements

SWE-021 - Transition to a Higher Class

7.2 - Classification and Safety-Criticality

7.13 - Transitioning to a Higher Class

7.16 - Appendix C. Requirements Mapping and Compliance Matrix

Training

Also see 3.4 Software Training

SWE-100 - Software Training Funding

SWE-222 - Software Assurance Training

7.18 - Train - Software Training Plan

3.1 Software Life Cycle Planning

SWE-033 - Acquisition vs. Development
                   Assessment 
SWE-013 - Software Plans
SWE-024 - Plan Tracking 
SWE-034 - Acceptance Criteria
SWE-036 - Software Process Determination
SWE-037 - Software Milestones
SWE-039 - Software Supplier Insight
SWE-040 - Access to Software Products
SWE-042 - Source Code Electronic Access
SWE-139 - Shall Statements
SWE-121 - Document Tailored Requirements
SWE-125 - Requirements Compliance Matrix
SWE-027 - Use of Commercial, Government,
                   and Legacy Software

7.3 - Acquisition Guidance

7.4 - Flow Down of NPR Requirements on Contracts and to Other Centers in Multi-Center Projects

7.5 - Work Breakdown Structures That Include Software

7.8 - Maturity of Life Cycle Products at Milestone Reviews

7.9 - Entrance and Exit Criteria

7.18 - SDP-SMP - Software Development - Management Plan

8.16 - Software Assurance Plan

3.2 Software Cost Estimation

SWE-015 - Cost Estimation
SWE-151 - Cost Estimate Conditions
SWE-174 - Software Planning Parameters

7.5 - Work Breakdown Structures That Include Software

7.6 - Software Test Estimation and Testing Levels

3.3 Software Schedules

SWE-016 - Software Schedule
SWE-018 - Software Activities Review
SWE-046 - Supplier Software Schedule

7.5 - Work Breakdown Structures That Include Software

7.8 - Maturity of Life Cycle Products at Milestone Reviews

7.9 - Entrance and Exit Criteria

8.15 - SA Tasking Checklist Tool

3.4 Software Training

SWE-017 - Project and Software Training

7.18 - Train - Software Training Plan

3.5 Software Classification
Assessments

SWE-020 - Software Classification 
SWE-176 - Software Records

7.2 - Classification and Safety-Criticality

7.13 - Transitioning to a Higher Class

7.16 - Appendix C. Requirements Mapping and Compliance Matrix

8.15 - SA Tasking Checklist Tool

3.6 Software Assurance
and Software Independent
Verification & Validation
SWE-022 - Software Assurance
SWE-141 - Software Independent Verification
                   and Validation
SWE-131 - Independent Verification and
                   Validation Project Execution Plan
SWE-178 - IV&V Artifacts
SWE-179 - IV&V Submitted Issues and Risks

8.16 - Software Assurance Plan

8.16 - IV&V Project Execution Plan


3.7 Safety-Critical Software

SWE-205 - Determination of Safety-
                  Critical Software 
SWE-023 - Software Safety-Critical
                   Requirements 
SWE-134 - Safety-Critical Software
                   Design Requirements
SWE-219 - Test Coverage for Safety
                   Critical Software Components
SWE-220 - Cyclomatic Complexity Values
                   for Safety-Critical Software

7.21 - Multi-condition Software Requirements

8.1 - Off Nominal Testing

8.4 - Additional Requirements Considerations for Use with Safety-Critical Software

8.5 - SW Failure Modes and Effects Analysis

8.7 - Software Fault Tree Analysis

8.8 - COTS Software Safety Considerations

8.9 - Software Safety Analysis

8.10 - Facility Software Safety Considerations

8.15 - SA Tasking Checklist Tool

8.16 - Software Safety and Hazard Analysis

8.17 - Software Safety Audit Checklists

8.19 - Dead / Dormant Code and Safety-Critical Software

8.20 - Safety Specific Activities in Each Phase

8.21 - Software Hazard Causes

8.22 - Hazardous Commands

6.1 - Design for Safety Checklist

6.2 - Checklist for General Software Safety Requirements

6.11 - Examples of Programming Practices for Exception Handling

Software Safety and Design Principles

3.8 Automatic Generation of
Software Source Code

SWE-146 - Auto-generated Source Code 
SWE-206 - Auto-Generation Software Inputs

8.11 - Auto-Generated Code
3.9 Software Development
Processes and Practices

SWE-032 - CMMI Levels for
                   Class A and B Software

8.12 - Basics of Software Auditing

8.16 - Audit Reports

3.10 Software ReuseSWE-147 - Specify Reusability Requirements
SWE-148 - Contribute to Agency
                   Software Catalog		8.8 - COTS Software Safety Considerations
3.11 Software CybersecuritySWE-156 - Evaluate Systems for
                   Security Risks
SWE-154 - Identify Security Risks
SWE-157 - Protect Against
                   Unauthorized Access
SWE-159 - Verify and Validate Risk
                   Mitigations 
SWE-207 - Secure Coding Practices
SWE-185 - Verification of Software Code
                   to Coding Standards
SWE-210 - Detection of Adversarial Actions
3.12 Software Bi-Directional TraceabilitySWE-052 - Bidirectional Traceability 
4.1 Software RequirementsSWE-050 - Software Requirements
SWE-051 - Software Requirements Analysis
SWE-184 - Software-related Constraints and
                  Assumptions
SWE-053 - Manage Requirements Changes
SWE-054 - Corrective Action for
                   Inconsistencies
SWE-055 - Requirements Validation

7.18 - SRS - Software Requirements Specification

8.16 - Software Requirements Analysis

4.2 Software ArchitectureSWE-057 - Software Architecture
SWE-143 - Software Architecture Review

7.7 - Software Architecture Description

6.3 - Checklist for Choosing a Real Time Operating System (RTOS)

6.4 - Checklist for Choosing Off-The Shelf Software (OTS)

4.3 Software DesignSWE-058 - Detailed Design

7.18 - IDD - Interface Design Description

7.18 - SDD - Software Data Dictionary

7.18 - SUM - Software User Manual

7.18 - SwDD - Software Design Description

8.2 - Software Reliability

8.5 - SW Failure Modes and Effects Analysis

8.7 - Software Fault Tree Analysis

8.16 - Software Design Analysis

Software Safety and Design Principles

4.4 Software ImplementationSWE-060 - Coding Software
SWE-061 - Coding Standards
SWE-135 - Static Analysis
SWE-062 - Unit Test
SWE-186 - Unit Test Repeatability
SWE-063 - Release Version Description
SWE-136 - Software Tool Accreditation 

7.18 - SUM - Software User Manual

7.18 - VDD - Version Description Document

8.2 - Software Reliability

8.16 - Source Code Quality Analysis

6.5 - Checklist for C Programming Practices

6.6 - Checklist for C++ Programming Practices

6.7 - Checklist for Ada Programming Practices

6.8 - Checklist for Fortran Programming Practices

6.9 - Checklist for Generic (Non-Language-Specific) Programming Practices

6.10 - Checklist for General Good Programming Practices

6.11 - Examples of Programming Practices for Exception Handling

4.5 Software Testing

SWE-065 - Test Plan, Procedures, Reports
SWE-066 - Perform Testing
SWE-187 - Control of Software Items

SWE-068 - Evaluate Test Results
SWE-070 - Models, Simulations, Tools
SWE-071 - Update Test Plans and 
                   Procedures
SWE-073 - Platform or Hi-Fidelity
                   Simulations
SWE-189 - Code Coverage Measurements
SWE-190 - Verify Code Coverage
SWE-191 - Software Regression Testing
SWE-192 - Software Hazardous
                  Requirements
SWE-193 - Acceptance Testing for Affected
                  Behavior
SWE-211 - Testing Levels of Non-Custom
                  Developed Software

7.6 - Software Test Estimation and Testing Levels

7.15 - Relationship Between NPR 7150.2 and NASA-STD-7009

7.21 - Multi-condition Software Requirements

7.18 - STP - Software Test Plan

7.18 - STR - Software Test Report

7.18 - Test - Software Test Procedures

8.1 - Off Nominal Testing

8.2 - Software Reliability

8.13 - Test Witnessing

8.16 - Testing Analysis

8.16 - Software Assurance Status Reports

4.6 Software Operations,
Maintenance, and Retirement		SWE-075 - Plan Operations, Maintenance,
                   Retirement
SWE-077 - Deliver Software Products 
SWE-194 - Delivery Requirements
                  Verification
SWE-195 - Software Maintenance Phase
SWE-196 - Software Retirement Archival

7.18 - Maint - Software Maintenance Plan

7.18 - VDD - Version Description Document

8.23 - Software Contents of a Certification of Flight Readiness

5.1 Software Configuration
Management (SCM)		SWE-079 - Develop CM Plan
SWE-080 - Track and Evaluate Changes
SWE-081 - Identify Software CM Items
SWE-082 - Authorizing Changes
SWE-083 - Status Accounting
SWE-084 - Configuration Audits
SWE-085 - Release Management
SWE-045 - Project Participation in Audits

7.18 - CR-PR - Software Change Request - Problem Report

7.18 - SCMP - Software Configuration Management Plan

5.2 Software Risk ManagementSWE-086 - Continuous Risk Management 

7.19 - Software Risk Management Checklists

7.20 - Assessing - Meets the Intent

8.6 - IV&V Surveillance

5.3 Software Peer Reviews
and Inspections		SWE-087 - Software Peer Reviews and
                   Inspections for Requirements,
                   Plans, Design, Code, and
                   Test Procedures
SWE-088 - Software Peer Reviews and
                   Inspections - Checklist 
                   Criteria and Tracking
SWE-089 - Software Peer Reviews and
                   Inspections -
                   Basic Measurements

7.10 - Peer Review and Inspections Including Checklists

7.18 - Inspect - Software Inspection, Peer Reviews, Inspections

5.4 Software MeasurementsSWE-090 - Management and Technical
                   Measurements
SWE-093 - Analysis of Measurement Data
SWE-094 - Reporting of Measurement
                   Analysis
SWE-199 - Performance Measures
SWE-200 - Software Requirements
                  Volatility Metrics

7.14 - Implementing Measurement Requirements and Analysis for Projects

7.18 - Metrics - Software Metrics Report

8.3 - Organizational Goals of Software Assurance Metrics

8.18 - SA Suggested Metrics

5.5 Software Non-conformance
or Defect Management

SWE-201 - Software Non-Conformances
SWE-202 - Software Severity Levels
SWE-203 - Mandatory Assessments for
                  Non-Conformances
SWE-204 - Process Assessments


7.18 - CR-PR - Software Change Request - Problem Report
Other SWEHB pages

7.11 - SWE History

7.12 - Retired

7.15 - Relationship Between NPR 7150.2 and NASA-STD-7009

7.17 - 7150.2D Appendices (Definitions, References, etc.)

8.14 - SA Tasking for NPR 7150.2B

Other Activities for consideration: 

  • Acquisition


  • No labels
Page Editor: Tim Crumbley
NASA Official: Tim Crumbley
Accessibility
NASA Software Engineering Handbook - A service of the NASA Office of the Chief Engineer
NASA Privacy Statement
______________________________________________________________________________