SM Distribution

• SWE-002 - Software Engineering Initiative
• SWE-005 - Software Processes
• SWE-095 - Report Engineering Discipline Status
• SWE-139 - Shall Statements
• SWE-208 - Advancing Software Assurance and Software Safety Practices

• A.13 NASA Institutional Requirements

• SWE-020 - Software Classification
• SWE-205 - Determination of Safety-Critical Software

• 7.16 - Appendix C. Requirements Mapping and Compliance Matrix

• A.01 Software Life Cycle Planning

• SWE-015 - Cost Estimation
• SWE-023 - Software Safety-Critical Requirements
• SWE-027 - Use of Commercial, Government, and Legacy Software
• SWE-032 - CMMI Levels for Class A and B Software
• SWE-033 - Acquisition vs. Development Assessment
• SWE-034 - Acceptance Criteria
• SWE-037 - Software Milestones
• SWE-039 - Software Supplier Insight
• SWE-040 - Access to Software Products
• SWE-042 - Source Code Electronic Access
• SWE-045 - Project Participation in Audits
• SWE-046 - Supplier Software Schedule
• SWE-086 - Continuous Risk Management
• SWE-087 - Software Peer Reviews and Inspections for Requirements, Plans, Design, Code, and Test Procedures
• SWE-134 - Safety-Critical Software Design Requirements

• 7.04 - Flow Down of NPR Requirements on Contracts and to Other Centers in Multi-Center Projects
• 7.10 - Peer Review and Inspections Including Checklists
• 7.18 - Documentation Guidance
• 8.06 - IV&V Surveillance
• PAT-024 - Checklist for Choosing Off-The Shelf Software

• A.01 Software Life Cycle Planning

• SWE-006 - Center Software Inventory
• SWE-013 - Software Plans
• SWE-016 - Software Schedule
• SWE-017 - Project and Software Training
• SWE-018 - Software Activities Review
• SWE-020 - Software Classification
• SWE-023 - Software Safety-Critical Requirements
• SWE-039 - Software Supplier Insight
• SWE-086 - Continuous Risk Management
• SWE-126 - Tailoring Considerations
• SWE-131 - Independent Verification and Validation Project Execution Plan
• SWE-141 - Software Independent Verification and Validation

• 8.06 - IV&V Surveillance

• A.01 Software Life Cycle Planning

• SWE-013 - Software Plans
• SWE-018 - Software Activities Review
• SWE-024 - Plan Tracking
• SWE-037 - Software Milestones
• SWE-046 - Supplier Software Schedule

• 5.08 - SDP-SMP - Software Development - Management Plan

• A.01 Software Life Cycle Planning

• SWE-015 - Cost Estimation
• SWE-034 - Acceptance Criteria
• SWE-062 - Unit Test
• SWE-065 - Test Plan, Procedures, Reports
• SWE-066 - Perform Testing
• SWE-068 - Evaluate Test Results
• SWE-087 - Software Peer Reviews and Inspections for Requirements, Plans, Design, Code, and Test Procedures
• SWE-190 - Verify Code Coverage
• SWE-191 - Software Regression Testing

• A.01 Software Life Cycle Planning

• SWE-027 - Use of Commercial, Government, and Legacy Software
• SWE-057 - Software Architecture

• 5.13 - SwDD - Software Design Description
• 8.05 - SW Failure Modes and Effects Analysis

• A.04 Software Design

• SWE-024 - Plan Tracking

• 5.02 - IDD - Interface Design Description
• 5.04 - Maint - Software Maintenance Plan
• 5.05 - Metrics - Software Metrics Report
• 5.06 - SCMP - Software Configuration Management Plan
• 5.07 - SDD - Software Data Dictionary
• 5.08 - SDP-SMP - Software Development - Management Plan
• 5.09 - SRS - Software Requirements Specification
• 5.10 - STP - Software Test Plan
• 5.11 - STR - Software Test Report
• 5.12 - SUM - Software User Manual
• 5.13 - SwDD - Software Design Description
• 5.14 - Test - Software Test Procedures
• 7.09 - Entrance and Exit Criteria
• 8.09 - Software Safety Analysis
• 8.51 - Software Assurance Plan
• 8.52 - Software Assurance Status Reports
• 8.53 - IV&V Project Execution Plan
• 8.54 - Software Requirements Analysis
• 8.55 - Software Design Analysis
• 8.56 - Source Code Quality Analysis
• 8.57 - Testing Analysis
• 8.58 - Software Safety and Hazard Analysis
• 8.59 - Audit Reports

• A.01 Software Life Cycle Planning
• A.02 Software Assurance and Software Safety
• A.03 Software Requirements
• A.04 Software Design
• A.05 Software Implementation
• A.06 Software Testing
• A.07 Software Release, Operations, Maintenance, and Retirement
• A.08 Software Configuration Management
• A.09 Software Risk Management
• A.11 Software Measurements

• 7.08 - Maturity of Life Cycle Products at Milestone Reviews
• 8.02 - Software Quality
• 8.09 - Software Safety Analysis

• A.01 Software Life Cycle Planning
• A.02 Software Assurance and Software Safety
• A.03 Software Requirements
• A.04 Software Design
• A.05 Software Implementation
• A.06 Software Testing
• A.07 Software Release, Operations, Maintenance, and Retirement
• A.08 Software Configuration Management
• A.09 Software Risk Management
• A.11 Software Measurements

• SWE-015 - Cost Estimation
• SWE-087 - Software Peer Reviews and Inspections for Requirements, Plans, Design, Code, and Test Procedures
• SWE-088 - Software Peer Reviews and Inspections - Checklist Criteria and Tracking
• SWE-089 - Software Peer Reviews and Inspections - Basic Measurements

• 5.03 - Inspect - Software Inspection, Peer Reviews, Inspections
• 6.5 - Checklist for C Programming Practices
• 6.6 - Checklist for C++ Programming Practices
• 6.7 - Checklist for Ada Programming Practices
• 6.8 - Checklist for Fortran Programming Practices
• 6.9 - Checklist for Generic (Non-Language-Specific) Programming Practices
• 6.10 - Checklist for General Good Programming Practices
• 6.11 - Examples of Programming Practices for Exception Handling
• 8.54 - Software Requirements Analysis
• 8.55 - Software Design Analysis
• 8.56 - Source Code Quality Analysis
• PAT-013 - Software Requirements Checklist
• PAT-003 - Functional Requirements Checklist
• PAT-014 - Architecture Design Checklist
• PAT-015 - Detailed Design Checklist
• PAT-016 - Functional Design Checklist
• PAT-017 - C Code Inspection Checklist
• PAT-018 - Test Plan Checklist
• PAT-019 - Test Procedure Checklist

• A.10 Software Peer Reviews and Inspections

• Peer Reviews may be used in the following activities: 

  • A.01 Software Life Cycle Planning - reviews of plans, etc.
  • A.02 Software Assurance and Software Safety - reviews of plans, etc.
  • A.03 Software Requirements - reviews of requirements, etc.
  • A.04 Software Design - review of architecture and designs
  • A.05 Software Implementation - review of code
  • A.06 Software Testing - review of test plans and procedures
  • A.07 Software Release, Operations, Maintenance, and Retirement - review of release documents, operations documents, etc.
  • A.08 Software Configuration Management - review of CM plan and audits
  • A.09 Software Risk Management - review of risks and related documents

• SWE-021 - Transition to a Higher Class
• SWE-176 - Software Records
• SWE-205 - Determination of Safety-Critical Software

• 7.02 - Classification and Safety-Criticality
• 7.16 - Appendix C. Requirements Mapping and Compliance Matrix
• 8.19 - Dead / Dormant Code and Safety-Critical Software

• A.01 Software Life Cycle Planning
• A.02 Software Assurance and Software Safety
• A.13 NASA Institutional Requirements

• SWE-090 - Management and Technical Measurements
• SWE-091 - Establish and Maintain Measurement Repository
• SWE-092 - Using Measurement Data
• SWE-093 - Analysis of Measurement Data
• SWE-094 - Reporting of Measurement Analysis

• 8.18 - SA Suggested Metrics
• 5.05 - Metrics - Software Metrics Report
• 5.08 - SDP-SMP - Software Development - Management Plan

• A.01 Software Life Cycle Planning
• A.11 Software Measurements
• A.13 NASA Institutional Requirements

• SWE-050 - Software Requirements
• SWE-055 - Requirements Validation
• SWE-065 - Test Plan, Procedures, Reports
• SWE-066 - Perform Testing
• SWE-068 - Evaluate Test Results
• SWE-070 - Models, Simulations, Tools
• SWE-073 - Platform or Hi-Fidelity Simulations
• SWE-081 - Identify Software CM Items
• SWE-086 - Continuous Risk Management
• SWE-139 - Shall Statements

• 7.20 - Assessing - Meets the Intent
• 8.11 - Auto-Generated Code

• A.02 Software Assurance and Software Safety
• A.06 Software Testing

• SWE-020 - Software Classification
• SWE-021 - Transition to a Higher Class
• SWE-121 - Document Tailored Requirements
• SWE-125 - Requirements Compliance Matrix
• SWE-126 - Tailoring Considerations
• SWE-139 - Shall Statements
• SWE-140 - Comply with Requirements
• SWE-176 - Software Records
• SWE-205 - Determination of Safety-Critical Software

• 7.02 - Classification and Safety-Criticality
• 7.13 - Transitioning to a Higher Class
• PAT-028 - NPR 7150.2D Compliance Matrix

• A.01 Software Life Cycle Planning

n/a 

• 5.01 - CR-PR - Software Change Request - Problem Report
• 5.02 - IDD - Interface Design Description
• 5.03 - Inspect - Software Inspection, Peer Reviews, Inspections
• 5.04 - Maint - Software Maintenance Plan
• 5.05 - Metrics - Software Metrics Report
• 5.06 - SCMP - Software Configuration Management Plan
• 5.07 - SDD - Software Data Dictionary
• 5.08 - SDP-SMP - Software Development - Management Plan
• 5.09 - SRS - Software Requirements Specification
• 5.10 - STP - Software Test Plan
• 5.11 - STR - Software Test Report
• 5.12 - SUM - Software User Manual
• 5.13 - SwDD - Software Design Description
• 5.14 - Test - Software Test Procedures
• 5.15 - Train - Software Training Plan
• 5.16 - VDD - Version Description Document
• 5.17 - Software Assurance Plan Minimum Content
• 5.18 - Safety Plan Minimum Content
• 5.19 - Software Assurance Status Report Minimum Content
• 5.20 - IV&V Project Execution Plan Minimum Content
• 5.21 - Software Requirements Analysis Report Minimum Content
• 5.22 - Software Design Analysis Report Minimum Content
• 5.23 - Testing Analysis Report Minimum Content
• 5.24 - Hazard Report Minimum Content
• 5.25 - Audit Report Minimum Content
• 5.26 - Source Code Quality Analysis Report Minimum Content
• 8.51 - Software Assurance Plan
• 8.52 - Software Assurance Status Reports
• 8.54 - Software Requirements Analysis
• 8.55 - Software Design Analysis

• A.01 Software Life Cycle Planning
• A.02 Software Assurance and Software Safety
• A.03 Software Requirements
• A.04 Software Design
• A.05 Software Implementation
• A.06 Software Testing
• A.07 Software Release, Operations, Maintenance, and Retirement
• A.08 Software Configuration Management
• A.09 Software Risk Management
• A.10 Software Peer Reviews and Inspections
• A.11 Software Measurements
• A.12 Software Non-conformance or Defect Management

• SWE-013 - Software Plans
• SWE-015 - Cost Estimation
• SWE-016 - Software Schedule
• SWE-017 - Project and Software Training
• SWE-020 - Software Classification
• SWE-051 - Software Requirements Analysis
• SWE-055 - Requirements Validation
• SWE-086 - Continuous Risk Management
• SWE-174 - Software Planning Parameters

• 8.06 - IV&V Surveillance
• 8.08 - COTS Software Safety Considerations
• 8.09 - Software Safety Analysis
• 8.12 - Basics of Software Auditing
• 8.24 - Software Assurance Risk
• 8.59 - Audit Reports

• A.01 Software Life Cycle Planning
• A.03 Software Requirements
• A.04 Software Design
• A.05 Software Implementation
• A.06 Software Testing
• A.07 Software Release, Operations, Maintenance, and Retirement
• A.09 Software Risk Management

• A.01 Software Life Cycle Planning
• A.09 Software Risk Management

• SWE-134 - Safety-Critical Software Design Requirements
• SWE-190 - Verify Code Coverage
• SWE-219 - Code Coverage for Safety Critical Software
• SWE-220 - Cyclomatic Complexity for Safety-Critical Software

• 8.57 - Testing Analysis

• A.06 Software Testing

• SWE-154 - Identify Security Risks
• SWE-156 - Evaluate Systems for Security Risks

• A.02 Software Assurance and Software Safety

• • SWE-023 - Software Safety-Critical Requirements 
  • SWE-050 - Software Requirements 
  • SWE-051 - Software Requirements Analysis 
  • SWE-055 - Requirements Validation 
  • SWE-058 - Detailed Design 
  • SWE-062 - Unit Test 
  • SWE-065 - Test Plan, Procedures, Reports 
  • SWE-066 - Perform Testing 
  • SWE-068 - Evaluate Test Results 
  • SWE-071 - Update Test Plans and Procedures 
  • SWE-131 - Independent Verification and Validation Project Execution Plan
  • SWE-134 - Safety-Critical Software Design Requirements
  • SWE-141 - Software Independent Verification and Validation 
  • SWE-184 - Software-related Constraints and Assumptions 
  • SWE-192 - Software Hazardous Requirements 
  • SWE-193 - Acceptance Testing for Affected System and Software Behavior
  • SWE-205 - Determination of Safety-Critical Software 

  Additions: 

• SWE-023 - Software Safety-Critical Requirements + tab 3.1
• SWE-050 - Software Requirements + tab 3.1
• SWE-051 - Software Requirements Analysis + tab 3.1
• SWE-055 - Requirements Validation +  tab 3.1
• SWE-058 - Detailed Design + tab 3.0
• SWE-062 - Unit Test + tab 3.0
• SWE-065 - Test Plan, Procedures, Reports + tab 3.2
• SWE-066 - Perform Testing +tab 3.2
• SWE-067 - Verify Implementation + tab 3.2
• SWE-068 - Evaluate Test Results + tab 3.2
• SWE-071 - Update Test Plans and Procedures + tab 3.2
• SWE-131 - Independent Verification and Validation Project Execution Plan + tab 3.2
• SWE-134 - Safety-Critical Software Design Requirements - tab 2, 3
• SWE-141 - Software Independent Verification and Validation + tab 3.2
• SWE-184 - Software-related Constraints and Assumptions + tab 3.1
• SWE-192 - Software Hazardous Requirements + tab 3.1
• SWE-193 - Acceptance Testing for Affected System and Software Behavior - tab 2
• SWE-205 - Determination of Safety-Critical Software + tab 3.1
• SWE-223 - Tailoring IV&V project selections + tab 3.2

Additions: 

• 5.14 - Test - Software Test Procedures + tab 3.2
• 7.06 - Software Test Estimation and Testing Levels + tab 3.2
• 7.12 - Qualification of Flight Software + tab 3.2
• 7.20 - Assessing - Meets the Intent + tab 3.1
• 8.02 - Software Reliability + tab 3.2
• 8.06 - IV&V Surveillance + tab 2
• 8.09 - Software Safety Analysis + tab 3.0
• 8.13 - Test Witnessing +  tab 3.2
• 8.17 - Software Safety Audit Checklists + tab 3.0
• 8.20 - Safety Specific Activities in Each Phase + tab 3.0
• 8.54 - Software Requirements Analysis + tab 3.1
• 8.55 - Software Design Analysis + tab 3.0
• 8.56 - Source Code Quality Analysis + tab 3.0
• 8.57 - Testing Analysis + tab 3.2
• 9.02 Software Safety and Design Principles + tab 3.0
• 9.03 Coding Standards + tab 3.0
• 9.07 Fault Detection and Response + tab 3.0
• 9.10 Initialization - Safe Mode + tab 3.0
• 9.11 Invalid Data Handling + tab 3.0

• A.02 Software Assurance and Software Safety
• A.03 Software Requirements
• A.04 Software Design
• A.05 Software Implementation
• A.06 Software Testing

• SWE-024 - Plan Tracking
• SWE-027 - Use of Commercial, Government, and Legacy Software
• SWE-039 - Software Supplier Insight
• SWE-053 - Manage Requirements Changes
• SWE-054 - Corrective Action for Inconsistencies
• SWE-057 - Software Architecture
• SWE-068 - Evaluate Test Results
• SWE-071 - Update Test Plans and Procedures
• SWE-192 - Software Hazardous Requirements
• SWE-201 - Software Non-Conformances

• 5.04 - Maint - Software Maintenance Plan
• 5.08 - SDP-SMP - Software Development - Management Plan
• 5.13 - SwDD - Software Design Description
• 8.01 - Off Nominal Testing
• 8.05 - SW Failure Modes and Effects Analysis
• 8.07 - Software Fault Tree Analysis
• 8.08 - COTS Software Safety Considerations
• 8.09 - Software Safety Analysis
• 8.51 - Software Assurance Plan
• 8.54 - Software Requirements Analysis
• 8.55 - Software Design Analysis
• 8.56 - Source Code Quality Analysis
• 8.57 - Testing Analysis
• 8.59 - Audit Reports

• A.02 Software Assurance and Software Safety
• A.03 Software Requirements
• A.04 Software Design
• A.05 Software Implementation
• A.06 Software Testing

• SWE-134 - Safety-Critical Software Design Requirements
• SWE-154 - Identify Security Risks
• SWE-156 - Evaluate Systems for Security Risks
• SWE-157 - Protect Against Unauthorized Access
• SWE-159 - Verify and Validate Risk Mitigations
• SWE-185 - Secure Coding Standards Verification
• SWE-207 - Secure Coding Practices
• SWE-210 - Detection of Adversarial Actions

• 8.02 - Software Quality
• 8.09 - Software Safety Analysis
• 8.21 - Software Hazard Causes
• PAT-012 - Detection of Adversarial Actions - Retired

• A.01 Software Life Cycle Planning
• A.02 Software Assurance and Software Safety
• A.05 Software Implementation
• A.06 Software Testing

• SWE-018 - Software Activities Review
• SWE-037 - Software Milestones
• SWE-039 - Software Supplier Insight
• SWE-057 - Software Architecture
• SWE-058 - Detailed Design
• SWE-086 - Continuous Risk Management
• SWE-087 - Software Peer Reviews and Inspections for Requirements, Plans, Design, Code, and Test Procedures
• SWE-126 - Tailoring Considerations
• SWE-192 - Software Hazardous Requirements

• 5.02 - IDD - Interface Design Description
• 7.07 - Software Architecture Description
• 8.02 - Software Quality
• 8.07 - Software Fault Tree Analysis
• 8.17 - Software Safety Audit Checklists
• 8.58 - Software Safety and Hazard Analysis

• A.04 Software Design

• SWE-037 - Software Milestones
• SWE-039 - Software Supplier Insight
• SWE-086 - Continuous Risk Management
• SWE-131 - Independent Verification and Validation Project Execution Plan

• 7.03 - Acquisition Guidance
• 7.19 - Software Risk Management Checklists
• 8.24 - Software Assurance Risk
• 8.53 - IV&V Project Execution Plan

• A.02 Software Assurance and Software Safety
• A.06 Software Testing

• SWE-037 - Software Milestones

• 8.02 - Software Quality
• 8.09 - Software Safety Analysis
• 8.58 - Software Safety and Hazard Analysis

• A.02 Software Assurance and Software Safety
• A.03 Software Requirements
• A.04 Software Design

• SWE-020 - Software Classification
• SWE-027 - Use of Commercial, Government, and Legacy Software
• SWE-066 - Perform Testing
• SWE-156 - Evaluate Systems for Security Risks
• SWE-192 - Software Hazardous Requirements
• SWE-201 - Software Non-Conformances
• SWE-202 - Software Severity Levels
• SWE-203 - Mandatory Assessments for Non-Conformances
• SWE-205 - Determination of Safety-Critical Software
• SWE-211 - Test Levels of Non-Custom Developed Software
• SWE-219 - Code Coverage for Safety Critical Software

• 5.04 - Maint - Software Maintenance Plan
• 5.13 - SwDD - Software Design Description
• 6.4 - Checklist for Choosing Off-The Shelf Software (OTS)
• 7.19 - Software Risk Management Checklists
• 7.20 - Assessing - Meets the Intent
• 8.02 - Software Quality
• 8.20 - Safety Specific Activities in Each Phase
• 8.57 - Testing Analysis

• A.01 Software Life Cycle Planning
• A.02 Software Assurance and Software Safety
• A.06 Software Testing

• SWE-134 - Safety-Critical Software Design Requirements
• SWE-205 - Determination of Safety-Critical Software

• 5.02 - IDD - Interface Design Description
• 7.08 - Maturity of Life Cycle Products at Milestone Reviews
• 7.09 - Entrance and Exit Criteria
• 7.19 - Software Risk Management Checklists
• 8.01 - Off Nominal Testing
• 8.02 - Software Quality
• 8.04 - Additional Requirements Considerations for Use with Safety-Critical Software
• 8.05 - SW Failure Modes and Effects Analysis
• 8.07 - Software Fault Tree Analysis
• 8.17 - Software Safety Audit Checklists
• 8.58 - Software Safety and Hazard Analysis

• A.02 Software Assurance and Software Safety

• SWE-023 - Software Safety-Critical Requirements
• SWE-050 - Software Requirements
• SWE-086 - Continuous Risk Management
• SWE-125 - Requirements Compliance Matrix
• SWE-154 - Identify Security Risks,
• SWE-184 - Software-related Constraints and Assumptions

• 5.04 - Maint - Software Maintenance Plan
• 5.09 - SRS - Software Requirements Specification
• 7.08 - Maturity of Life Cycle Products at Milestone Reviews
• 7.09 - Entrance and Exit Criteria
• 8.15 - SA Tasking Checklist Tool
• 8.16 - SA Products
• 8.51 - Software Assurance Plan

• A.02 Software Assurance and Software Safety

• SWE-060 - Coding Software
• SWE-070 - Models, Simulations, Tools
• SWE-081 - Identify Software CM Items
• SWE-146 - Auto-generated Source Code
• SWE-147 - Specify Reusability Requirements
• SWE-206 - Auto-Generation Software Inputs

• 7.15 - Relationship Between NPR 7150.2 and NASA-STD-7009
• 8.57 - Testing Analysis

• A.05 Software Implementation

• SWE-013 - Software Plans
• SWE-016 - Software Schedule
• SWE-018 - Software Activities Review
• SWE-022 - Software Assurance
• SWE-037 - Software Milestones
• SWE-039 - Software Supplier Insight
• SWE-045 - Project Participation in Audits
• SWE-085 - Release Management
• SWE-086 - Continuous Risk Management
• SWE-088 - Software Peer Reviews and Inspections - Checklist Criteria and Tracking
• SWE-141 - Software Independent Verification and Validation
• SWE-209 - Benchmarking Software Assurance and Software Safety Capabilities

• PAT-036 - Architecture and Design Process Audit
• PAT-037 - Configuration Management Process Audit
• PAT-038 - Implementation Process Audit
• PAT-039 - Operations, Maintenance, & Retirement Process Audit
• PAT-040 - Project Management Process Audit
• PAT-041 - Project Planning Process Audit
• PAT-042 - Requirements Development and Mgmt Audit
• PAT-043 - Software Defects & Tracking Process Audit
• PAT-044 - Software Hazard Development Process Audit
• PAT-045 - Software Peer Review Inspection Report Audit
• PAT-046 - Test Verification and Validation Process Audit

• A.02 Software Assurance and Software Safety

• SWE-065 - Test Plan, Procedures, Reports
• SWE-066 - Perform Testing

• 5.10 - STP - Software Test Plan
• 5.11 - STR - Software Test Report
• 7.06 - Software Test Estimation and Testing Levels
• 7.08 - Maturity of Life Cycle Products at Milestone Reviews
• 8.57 - Testing Analysis

• A.06 Software Testing

• SWE-022 - Software Assurance

• 8.51 - Software Assurance Plan

• A.02 Software Assurance and Software Safety

• SWE-013 - Software Plans
• SWE-016 - Software Schedule
• SWE-020 - Software Classification
• SWE-022 - Software Assurance
• SWE-024 - Plan Tracking
• SWE-032 - CMMI Levels for Class A and B Software
• SWE-033 - Acquisition vs. Development Assessment
• SWE-034 - Acceptance Criteria
• SWE-037 - Software Milestones
• SWE-039 - Software Supplier Insight
• SWE-045 - Project Participation in Audits
• SWE-046 - Supplier Software Schedule
• SWE-051 - Software Requirements Analysis
• SWE-054 - Corrective Action for Inconsistencies
• SWE-057 - Software Architecture
• SWE-058 - Detailed Design
• SWE-061 - Coding Standards
• SWE-065 - Test Plan, Procedures, Reports
• SWE-066 - Perform Testing
• SWE-071 - Update Test Plans and Procedures
• SWE-075 - Plan Operations, Maintenance, Retirement
• SWE-077 - Deliver Software Products
• SWE-079 - Develop CM Plan
• SWE-080 - Track and Evaluate Changes
• SWE-081 - Identify Software CM Items

• SWE-082 - Authorizing Changes

• SWE-085 - Release Management

• SWE-086 - Continuous Risk Management
• SWE-087 - Software Peer Reviews and Inspections for Requirements, Plans, Design, Code, and Test Procedures
• SWE-088 - Software Peer Reviews and Inspections - Checklist Criteria and Tracking
• SWE-090 - Management and Technical Measurements
• SWE-093 - Analysis of Measurement Data
• SWE-121 - Document Tailored Requirements
• SWE-125 - Requirements Compliance Matrix
• SWE-131 - Independent Verification and Validation Project Execution Plan
• SWE-134 - Safety-Critical Software Design Requirements
• SWE-135 - Static Analysis
• SWE-139 - Shall Statements
• SWE-143 - Software Architecture Review
• SWE-146 - Auto-generated Source Code
• SWE-151 - Cost Estimate Conditions
• SWE-159 - Verify and Validate Risk Mitigations
• SWE-184 - Software-related Constraints and Assumptions
• SWE-185 - Secure Coding Standards Verification
• SWE-190 - Verify Code Coverage
• SWE-191 - Software Regression Testing
• SWE-195 - Software Maintenance Phase
• SWE-194 - Delivery Requirements Verification
• SWE-199 - Performance Measures
• SWE-200 - Software Requirements Volatility Metrics
• SWE-202 - Software Severity Levels
• SWE-203 - Mandatory Assessments for Non-Conformances
• SWE-204 - Process Assessments
• SWE-205 - Determination of Safety-Critical Software
• SWE-207 - Secure Coding Practices

• 8.51 - Software Assurance Plan
• 8.53 - IV&V Project Execution Plan
• 8.54 - Software Requirements Analysis
• 8.58 - Software Safety and Hazard Analysis
• 8.55 - Software Design Analysis
• 8.56 - Source Code Quality Analysis
• 8.57 - Testing Analysis
• 8.52 - Software Assurance Status Reports
• 8.59 - Audit Reports
• Objective Evidence

• A.02 Software Assurance and Software Safety
• A.03 Software Requirements
• A.04 Software Design
• A.05 Software Implementation
• A.06 Software Testing

• 8.01 - Off Nominal Testing
• 8.05 - SW Failure Modes and Effects Analysis
• 8.09 - Software Safety Analysis

• A.02 Software Assurance and Software Safety

• SWE-013 - Software Plans
• SWE-015 - Cost Estimation
• SWE-016 - Software Schedule
• SWE-017 - Project and Software Training
• SWE-018 - Software Activities Review
• SWE-020 - Software Classification
• SWE-022 - Software Assurance
• SWE-023 - Software Safety-Critical Requirements
• SWE-024 - Plan Tracking
• SWE-027 - Use of Commercial, Government, and Legacy Software
• SWE-032 - CMMI Levels for Class A and B Software
• SWE-033 - Acquisition vs. Development Assessment
• SWE-036 - Software Process Determination
• SWE-037 - Software Milestones
• SWE-039 - Software Supplier Insight
• SWE-046 - Supplier Software Schedule
• SWE-050 - Software Requirements
• SWE-051 - Software Requirements Analysis
• SWE-052 - Bidirectional Traceability
• SWE-053 - Manage Requirements Changes
• SWE-054 - Corrective Action for Inconsistencies
• SWE-055 - Requirements Validation
• SWE-057 - Software Architecture
• SWE-058 - Detailed Design
• SWE-060 - Coding Software
• SWE-061 - Coding Standards
• SWE-062 - Unit Test
• SWE-063 - Release Version Description
• SWE-065 - Test Plan, Procedures, Reports
• SWE-066 - Perform Testing
• SWE-068 - Evaluate Test Results
• SWE-070 - Models, Simulations, Tools
• SWE-071 - Update Test Plans and Procedures
• SWE-073 - Platform or Hi-Fidelity Simulations
• SWE-075 - Plan Operations, Maintenance, Retirement
• SWE-077 - Deliver Software Products
• SWE-079 - Develop CM Plan
• SWE-080 - Track and Evaluate Changes
• SWE-081 - Identify Software CM Items
• SWE-082 - Authorizing Changes
• SWE-084 - Configuration Audits
• SWE-085 - Release Management
• SWE-086 - Continuous Risk Management
• SWE-087 - Software Peer Reviews and Inspections for Requirements, Plans, Design, Code, and Test Procedures
• SWE-088 - Software Peer Reviews and Inspections - Checklist Criteria and Tracking
• SWE-089 - Software Peer Reviews and Inspections - Basic Measurements
• SWE-093 - Analysis of Measurement Data
• SWE-121 - Document Tailored Requirements
• SWE-125 - Requirements Compliance Matrix
• SWE-134 - Safety-Critical Software Design Requirements
• SWE-135 - Static Analysis
• SWE-136 - Software Tool Accreditation
• SWE-139 - Shall Statements
• SWE-143 - Software Architecture Review
• SWE-146 - Auto-generated Source Code
• SWE-147 - Specify Reusability Requirements
• SWE-148 - Contribute to Agency Software Catalog
• SWE-151 - Cost Estimate Conditions
• SWE-154 - Identify Security Risks
• SWE-156 - Evaluate Systems for Security Risks
• SWE-157 - Protect Against Unauthorized Access
• SWE-159 - Verify and Validate Risk Mitigations
• SWE-174 - Software Planning Parameters
• SWE-176 - Software Records
• SWE-179 - IV&V Submitted Issues and Risks
• SWE-184 - Software-related Constraints and Assumptions
• SWE-185 - Secure Coding Standards Verification
• SWE-185 - Secure Coding Standards Verification
• SWE-186 - Unit Test Repeatability
• SWE-187 - Control of Software Items
• SWE-189 - Code Coverage Measurements
• SWE-190 - Verify Code Coverage
• SWE-191 - Software Regression Testing
• SWE-192 - Software Hazardous Requirements
• SWE-194 - Delivery Requirements Verification
• SWE-195 - Software Maintenance Phase
• SWE-199 - Performance Measures
• SWE-200 - Software Requirements Volatility Metrics
• SWE-201 - Software Non-Conformances
• SWE-202 - Software Severity Levels
• SWE-203 - Mandatory Assessments for Non-Conformances
• SWE-204 - Process Assessments
• SWE-205 - Determination of Safety-Critical Software
• SWE-207 - Secure Coding Practices
• SWE-210 - Detection of Adversarial Actions
• SWE-211 - Test Levels of Non-Custom Developed Software
• SWE-219 - Code Coverage for Safety Critical Software

• 7.14 - Implementing Measurement Requirements and Analysis for Projects

• A.11 Software Measurements

• SWE-060 - Coding Software
• SWE-066 - Perform Testing
• SWE-135 - Static Analysis
• SWE-189 - Code Coverage Measurements
• SWE-190 - Verify Code Coverage

• 7.13 - Transitioning to a Higher Class
• 8.56 - Source Code Quality Analysis
• 8.57 - Testing Analysis
• 9.06 Dead Code Exclusion

• A.02 Software Assurance and Software Safety

• SWE-023 - Software Safety-Critical Requirements
• SWE-134 - Safety-Critical Software Design Requirements
• SWE-190 - Verify Code Coverage
• SWE-205 - Determination of Safety-Critical Software

• A.02 Software Assurance and Software Safety

• SWE-205 - Determination of Safety-Critical Software

• 8.04 - Additional Requirements Considerations for Use with Safety-Critical Software

• A.02 Software Assurance and Software Safety

• A.02 Software Assurance and Software Safety

• 7.09 - Entrance and Exit Criteria

• A.07 Software Release, Operations, Maintenance, and Retirement

• SWE-086 - Continuous Risk Management

• 7.19 - Software Risk Management Checklists

• A.09 Software Risk Management

• SWE-013 - Software Plans
• SWE-016 - Software Schedule
• SWE-020 - Software Classification
• SWE-022 - Software Assurance
• SWE-036 - Software Process Determination
• SWE-046 - Supplier Software Schedule
• SWE-054 - Corrective Action for Inconsistencies
• SWE-121 - Document Tailored Requirements
• SWE-125 - Requirements Compliance Matrix
• SWE-151 - Cost Estimate Conditions

• 5.17 - Software Assurance Plan Minimum Content
• 5.18 - Safety Plan Minimum Content
• 7.02 - Classification and Safety-Criticality
• 7.08 - Maturity of Life Cycle Products at Milestone Reviews
• 8.05 - SW Failure Modes and Effects Analysis
• 8.15 - SA Tasking Checklist Tool

• A.02 Software Assurance and Software Safety

• SWE-018 - Software Activities Review

• 5.19 - Software Assurance Status Report Minimum Content
• 8.54 - Software Requirements Analysis
• 8.55 - Software Design Analysis
• 8.56 - Source Code Quality Analysis
• 8.57 - Testing Analysis
• 8.58 - Software Safety and Hazard Analysis
• 8.12 – Basics of Software Auditing

• A.02 Software Assurance and Software Safety

• SWE-131 - Independent Verification and Validation Project Execution Plan
• SWE-178 - IV&V Artifacts
• SWE-179 - IV&V Submitted Issues and Risks

• 5.20 - IV&V Project Execution Plan Minimum Content
• 8.06 - IV&V Surveillance

• A.02 Software Assurance and Software Safety

• SWE-050 - Software Requirements
• SWE-051 - Software Requirements Analysis
• SWE-052 - Bidirectional Traceability
• SWE-087 - Software Peer Reviews and Inspections for Requirements, Plans, Design, Code, and Test Procedures
• SWE-134 - Safety-Critical Software Design Requirements
• SWE-184 - Software-related Constraints and Assumptions
• SWE-192 - Software Hazardous Requirements

• A.03 Software Requirements

• SWE-052 - Bidirectional Traceability
• SWE-058 - Detailed Design
• SWE-060 - Coding Software
• SWE-087 - Software Peer Reviews and Inspections for Requirements, Plans, Design, Code, and Test Procedures
• SWE-088 - Software Peer Reviews and Inspections - Checklist Criteria and Tracking
• SWE-134 - Safety-Critical Software Design Requirements
• SWE-143 - Software Architecture Review
• SWE-157 - Protect Against Unauthorized Access

• A.04 Software Design

• SWE-052 - Bidirectional Traceability
• SWE-060 - Coding Software
• SWE-061 - Coding Standards
• SWE-062 - Unit Test

• SWE-063 - Release Version Description

• SWE-086 - Continuous Risk Management
• SWE-087 - Software Peer Reviews and Inspections for Requirements, Plans, Design, Code, and Test Procedures
• SWE-089 - Software Peer Reviews and Inspections - Basic Measurement

• SWE-135 - Static Analysis

• SWE-136 - Software Tool Accreditation

• SWE-157 - Protect Against Unauthorized Access 

• SWE-185 - Secure Coding Standards Verification

• SWE-186 - Unit Test Repeatability
• SWE-189 - Code Coverage Measurements and SWE-190 - Verify Code Coverage

• SWE-207 - Secure Coding Practices

• SWE-220 - Cyclomatic Complexity for Safety-Critical Software

• A.05 Software Implementation

• SWE-065 - Test Plan, Procedures, Reports
• SWE-066 - Perform Testing
• SWE-068 - Evaluate Test Results
• SWE-141 - Software Independent Verification and Validation
• SWE-192 - Software Hazardous Requirements
• SWE-219 - Code Coverage for Safety Critical Software

• 5.10 - STP - Software Test Plan
• 5.11 - STR - Software Test Report
• 5.14 - Test - Software Test Procedures
• 5.23 - Testing Analysis Report Minimum Content
• 8.01 - Off Nominal Testing
• 8.08 - COTS Software Safety Considerations
• 8.11 - Auto-Generated Code
• 8.13 - Test Witnessing
• 8.19 - Dead / Dormant Code and Safety-Critical Software
• PAT-019 - Test Procedure Checklist
• PAT-026 - Test Review Checklist For Test Leads
• PAT-027 - Test Review Checklist For Review Teams

• A.06 Software Testing

• SWE-051 - Software Requirements Analysis
• SWE-052 - Bidirectional Traceability
• SWE-058 - Detailed Design
• SWE-205 - Determination of Safety-Critical Software

• 5.24 - Hazard Report Minimum Content
• 6.2 - Checklist for General Software Safety Requirements
• 8.05 - SW Failure Modes and Effects Analysis
• 8.07 - Software Fault Tree Analysis
• 8.09 - Software Safety Analysis
• 8.21 - Software Hazard Causes
• 8.54 - Software Requirements Analysis
• 8.55 - Software Design Analysis
• 8.56 - Source Code Quality Analysis
• 8.57 - Testing Analysis
• PAT-007 - Checklist for General Software Safety Requirements

• A.02 Software Assurance and Software Safety

• SWE-013 - Software Plans
• SWE-016 - Software Schedule
• SWE-022 - Software Assurance
• SWE-024 - Plan Tracking
• SWE-032 - CMMI Levels for Class A and B Software
• SWE-039 - Software Supplier Insight
• SWE-045 - Project Participation in Audits
• SWE-077 - Deliver Software Products
• SWE-079 - Develop CM Plan
• SWE-084 - Configuration Audits
• SWE-085 - Release Management
• SWE-086 - Continuous Risk Management
• SWE-088 - Software Peer Reviews and Inspections - Checklist Criteria and Tracking
• SWE-139 - Shall Statements
• SWE-195 - Software Maintenance Phase

• 5.03 - Inspect - Software Inspection, Peer Reviews, Inspections
• 5.25 - Audit Report Minimum Content
• 8.12 - Basics of Software Auditing
• 8.18 - SA Suggested Metrics
• PAT-036 - Architecture and Design Process Audit
• PAT-037 - Configuration Management Process Audit
• PAT-038 - Implementation Process Audit
• PAT-039 - Operations, Maintenance, & Retirement Process Audit
• PAT-040 - Project Management Process Audit
• PAT-041 - Project Planning Process Audit
• PAT-042 - Requirements Development and Mgmt Audit
• PAT-043 - Software Defects & Tracking Process Audit
• PAT-044 - Software Hazard Development Process Audit
• PAT-045 - Software Peer Review Inspection Report Audit
• PAT-046 - Test Verification and Validation Process Audit

• A.02 Software Assurance and Software Safety

• SWE-134 - Safety-Critical Software Design Requirements

• 9.02 Software Safety and Design Principles
• 9.03 Coding Standards
• 9.04 Command Receipt Acknowledgement
• 9.05 Data Interface Integrity
• 9.06 Dead Code Exclusion
• 9.07 Fault Detection and Response
• 9.08 Flight Software Modification
• 9.09 Incorrect Memory Use or Access
• 9.10 Initialization - Safe Mode
• 9.11 Invalid Data Handling
• 9.12 Resource Margins
• 9.13 Resource Oversubscription
• 9.14 Resource Usage Measurement
• 9.15 Safe Transitions
• 9.16 Thread Safety
• 9.17 Toggle Commands

• A.04 Software Design

• SWE-134 - Safety-Critical Software Design Requirements

• 9.05 Data Interface Integrity
• 9.07 Fault Detection and Response
• 9.09 Incorrect Memory Use or Access
• 9.10 Initialization - Safe Mode
• 9.11 Invalid Data Handling
• 9.15 Safe Transitions

• A.02 Software Assurance and Software Safety
• A.04 Software Design

• SWE-061 - Coding Standards
• SWE-185 - Secure Coding Standards Verification
• SWE-207 - Secure Coding Practices

• A.04 Software Design

• 9.07 Fault Detection and Response
• 9.11 Invalid Data Handling

• A.04 Software Design

• SWE-134 - Safety-Critical Software Design Requirements

• 9.07 Fault Detection and Response
• 9.11 Invalid Data Handling

• A.04 Software Design

• 8.19 - Dead / Dormant Code and Safety-Critical Software

• A.04 Software Design

• A.04 Software Design

• A.04 Software Design

• 8.02 - Software Quality
• 9.08 Flight Software Modification
• 9.16 Thread Safety

• A.04 Software Design

• A.04 Software Design

• A.04 Software Design

• A.04 Software Design

• 9.12 Resource Margins

• A.04 Software Design

• 9.06 Dead Code Exclusion

• A.04 Software Design

• A.04 Software Design

• A.04 Software Design

• A.04 Software Design

• SWE-024 - Plan Tracking
• SWE-053 - Manage Requirements Changes
• SWE-054 - Corrective Action for Inconsistencies

• SWE-080 - Track and Evaluate Change

• SWE-082 - Authorizing Changes
• SWE-083 - Status Accounting
• SWE-085 - Release Management
• SWE-187 - Control of Software Items
• SWE-194 - Delivery Requirements Verification
• SWE-200 - Software Requirements Volatility Metrics
• SWE-201 - Software Non-Conformances
• SWE-202 - Software Severity Levels
• SWE-203 - Mandatory Assessments for Non-Conformances

• 5.06 - SCMP - Software Configuration Management Plan
• 5.14 - Test - Software Test Procedures

• A.03 Software Requirements
• A.06 Software Testing
• A.08 Software Configuration Management
• A.12 Software Non-conformance or Defect Management

• SWE-020 - Software Classification
• SWE-027 - Use of Commercial, Government, and Legacy Software
• SWE-058 - Detailed Design

• 5.09 - SRS - Software Requirements Specification
• 5.10 - STP - Software Test Plan
• 5.13 - SwDD - Software Design Description
• 5.14 - Test - Software Test Procedures
• 7.08 - Maturity of Life Cycle Products at Milestone Reviews
• 8.05 - SW Failure Modes and Effects Analysis
• 8.09 - Software Safety Analysis

• A.04 Software Design

• SWE-087 - Software Peer Reviews and Inspections for Requirements, Plans, Design, Code, and Test Procedures
• SWE-088 - Software Peer Reviews and Inspections - Checklist Criteria and Tracking
• SWE-089 - Software Peer Reviews and Inspections - Basic Measurements

• 7.10 - Peer Review and Inspections Including Checklists

• A.10 Software Peer Reviews and Inspections

• SWE-075 - Plan Operations, Maintenance, Retirement

• SWE-080 - Track and Evaluate Changes
• SWE-195 - Software Maintenance Phase
• SWE-199 - Performance Measures

• 7.08 - Maturity of Life Cycle Products at Milestone Reviews
• 8.02 - Software Quality

• A.07 Software Release, Operations, Maintenance, and Retirement

• SWE-016 - Software Schedule
• SWE-022 - Software Assurance
• SWE-040 - Access to Software Products
• SWE-046 - Supplier Software Schedule
• SWE-086 - Continuous Risk Management
• SWE-090 - Management and Technical Measurements
• SWE-091 - Establish and Maintain Measurement Repository
• SWE-092 - Using Measurement Data
• SWE-093 - Analysis of Measurement Data
• SWE-094 - Reporting of Measurement Analysis
• SWE-095 - Report Engineering Discipline Status

• 7.08 - Maturity of Life Cycle Products at Milestone Reviews
• 7.14 - Implementing Measurement Requirements and Analysis for Projects

• A.11 Software Measurements

• SWE-018 - Software Activities Review
• SWE-024 - Plan Tracking
• SWE-036 - Software Process Determination
• SWE-058 - Detailed Design
• SWE-062 - Unit Test
• SWE-079 - Develop CM Plan
• SWE-081 - Identify Software CM Items
• SWE-082 - Authorizing Changes
• SWE-083 - Status Accounting
• SWE-084 - Configuration Audits
• SWE-085 - Release Management
• SWE-186 - Unit Test Repeatability

• 5.01 - CR-PR - Software Change Request - Problem Report
• 7.08 - Maturity of Life Cycle Products at Milestone Reviews

• A.08 Software Configuration Management

• SWE-040 - Access to Software Products
• SWE-050 - Software Requirements
• SWE-058 - Detailed Design

• 5.14 - Test - Software Test Procedures
• 7.08 - Maturity of Life Cycle Products at Milestone Reviews

• A.04 Software Design

• SWE-005 - Software Processes
• SWE-006 - Center Software Inventory
• SWE-013 - Software Plans 
• SWE-015 - Cost Estimation
• SWE-016 - Software Schedule
• SWE-017 - Project and Software Training
• SWE-018 - Software Activities Review 
• SWE-020 - Software Classification
• SWE-023 - Software Safety-Critical Requirements
• SWE-024 - Plan Tracking
• SWE-027 - Use of Commercial, Government, and Legacy Software
• SWE-033 - Acquisition vs. Development Assessment
• SWE-034 - Acceptance Criteria
• SWE-036 - Software Process Determination
• SWE-037 - Software Milestones
• SWE-039 - Software Supplier Insight
• SWE-040 - Access to Software Products
• SWE-046 - Supplier Software Schedule
• SWE-050 - Software Requirements 
• SWE-051 - Software Requirements Analysis
• SWE-053 - Manage Requirements Changes
• SWE-054 - Corrective Action for Inconsistencies
• SWE-055 - Requirements Validation
• SWE-058 - Detailed Design
• SWE-061 - Coding Standards
• SWE-062 - Unit Test
• SWE-075 - Plan Operations, Maintenance, Retirement
• SWE-079 - Develop CM Plan
• SWE-082 - Authorizing Changes
• SWE-083 - Status Accounting
• SWE-085 - Release Management
• SWE-086 - Continuous Risk Management
• SWE-087 - Software Peer Reviews and Inspections for Requirements, Plans, Design, Code, and Test Procedures
• SWE-088 - Software Peer Reviews and Inspections - Checklist Criteria and Tracking
• SWE-089 - Software Peer Reviews and Inspections - Basic Measurements
• SWE-090 - Management and Technical Measurements
• SWE-091 - Establish and Maintain Measurement Repository
• SWE-093 - Analysis of Measurement Data
• SWE-121 - Document Tailored Requirements
• SWE-125 - Requirements Compliance Matrix
• SWE-126 - Tailoring Considerations
• SWE-151 - Cost Estimate Conditions
• SWE-153 - ETA Define Document Content
• SWE-156 - Evaluate Systems for Security Risks
• SWE-174 - Software Planning Parameters
• SWE-176 - Software Records
• SWE-184 - Software-related Constraints and Assumptions
• SWE-185 - Secure Coding Standards Verification
• SWE-186 - Unit Test Repeatability
• SWE-187 - Control of Software Items
• SWE-190 - Verify Code Coverage
• SWE-193 - Acceptance Testing for Affected System and Software Behavior
• SWE-195 - Software Maintenance Phase
• SWE-196 - Software Retirement Archival
• SWE-199 - Performance Measures
• SWE-202 - Software Severity Levels
• SWE-203 - Mandatory Assessments for Non-Conformances
• SWE-205 - Determination of Safety-Critical Software
• SWE-206 - Auto-Generation Software Inputs
• SWE-210 - Detection of Adversarial Actions
• SWE-211 - Test Levels of Non-Custom Developed Software
• SWE-214 - Internal Software Sharing and Reuse
• SWE-217 - List of All Contributors and Disclaimer Notice

• 5.11 - STR - Software Test Report
• 7.02 - Classification and Safety-Criticality
• 7.03 - Acquisition Guidance
• 7.05 - Work Breakdown Structures That Include Software
• 7.08 - Maturity of Life Cycle Products at Milestone Reviews
• 7.14 - Implementing Measurement Requirements and Analysis for Projects
• 7.16 - Appendix C. Requirements Mapping and Compliance Matrix
• 8.02 - Software Quality

• A.01 Software Life Cycle Planning

• SWE-017 - Project and Software Training
• SWE-050 - Software Requirements
• SWE-052 - Bidirectional Traceability
• SWE-053 - Manage Requirements Changes
• SWE-055 - Requirements Validation
• SWE-058 - Detailed Design
• SWE-184 - Software-related Constraints and Assumptions

• 5.02 - IDD - Interface Design Description
• 5.14 - Test - Software Test Procedures
• 7.08 - Maturity of Life Cycle Products at Milestone Reviews
• 8.02 - Software Quality
• 8.10 - Facility Software with Safety Considerations
• 8.54 - Software Requirements Analysis
• 8.58 - Software Safety and Hazard Analysis
• 8.59 - Audit Reports
• PAT-003 - Functional Requirements Checklist
• PAT-004 - Safety Requirements Analysis Checklist
• PAT-007 - Checklist for General Software Safety Requirements
• PAT-013 - Software Requirements Checklist
• PAT-034 - SA Requirements Analysis Checklist
• PAT-042 - Requirements Development and Mgmt Audit
• PAT-059 - Software Requirements Specification Assessment
• PAT-079 - Requirements Quality Checklist
• PAT-080 - Requirements Contents Checklist
• PAT-081 - Requirements Editorial Checklist

• A.03 Software Requirements

• SWE-015 - Cost Estimation
• SWE-024 - Plan Tracking
• SWE-036 - Software Process Determination
• SWE-062 - Unit Test
• SWE-065 - Test Plan, Procedures, Reports
• SWE-066 - Perform Testing
• SWE-068 - Evaluate Test Results
• SWE-086 - Continuous Risk Management
• SWE-087 - Software Peer Reviews and Inspections for Requirements, Plans, Design, Code, and Test Procedures
• SWE-186 - Unit Test Repeatability
• SWE-190 - Verify Code Coverage
• SWE-191 - Software Regression Testing
• SWE-201 - Software Non-Conformances

• 5.02 - IDD - Interface Design Description
• 7.06 - Software Test Estimation and Testing Levels
• 7.08 - Maturity of Life Cycle Products at Milestone Reviews
• 8.13 - Test Witnessing
• 8.57 - Testing Analysis

• A.06 Software Testing

• SWE-027 - Use of Commercial, Government, and Legacy Software
• SWE-065 - Test Plan, Procedures, Reports
• SWE-068 - Evaluate Test Results
• SWE-191 - Software Regression Testing
• SWE-193 - Acceptance Testing for Affected System and Software Behavior

• 5.08 - SDP-SMP - Software Development - Management Plan
• 7.06 - Software Test Estimation and Testing Levels
• 7.08 - Maturity of Life Cycle Products at Milestone Reviews
• 8.13 - Test Witnessing

• A.02 Software Assurance and Software Safety
• A.06 Software Testing

• SWE-058 - Detailed Design
• SWE-077 - Deliver Software Products

• 7.08 - Maturity of Life Cycle Products at Milestone Reviews

• A.04 Software Design
• A.07 Software Release, Operations, Maintenance, and Retirement

• SWE-052 - Bidirectional Traceability
• SWE-057 - Software Architecture
• SWE-058 - Detailed Design

• 5.02 - IDD - Interface Design Description
• 5.14 - Test - Software Test Procedures
• 7.07 - Software Architecture Description
• 7.08 - Maturity of Life Cycle Products at Milestone Reviews
• 8.02 - Software Quality
• 8.08 - COTS Software Safety Considerations

• A.04 Software Design

• SWE-057 - Software Architecture
• SWE-065 - Test Plan, Procedures, Reports
• SWE-071 - Update Test Plans and Procedures
• SWE-191 - Software Regression Testing

• 5.02 - IDD - Interface Design Description
• 5.07 - SDD - Software Data Dictionary
• 5.09 - SRS - Software Requirements Specification
• 5.13 - SwDD - Software Design Description
• 7.06 - Software Test Estimation and Testing Levels
• 7.08 - Maturity of Life Cycle Products at Milestone Reviews
• 8.01 - Off Nominal Testing
• PAT-019 - Test Procedure Checklist

• A.06 Software Testing

• SWE-017 - Project and Software Training
• SWE-100 - Software Training Funding
• SWE-222 - Software Assurance Training

• A.01 Software Life Cycle Planning
• A.13 NASA Institutional Requirements

• SWE-040 - Access to Software Products
• SWE-046 - Supplier Software Schedule
• SWE-063 - Release Version Description
• SWE-075 - Plan Operations, Maintenance, Retirement
• SWE-077 - Deliver Software Products
• SWE-082 - Authorizing Changes
• SWE-085 - Release Management

• A.07 Software Release, Operations, Maintenance, and Retirement
• A.08 Software Configuration Management

n/a

n/a

n/a

n/a

n/a

n/a

n/a

n/a

n/a

n/a

n/a

n/a

n/a

n/a

n/a

n/a

n/a

n/a

n/a

n/a

• SWE-084 - Configuration Audits

• A.08 Software Configuration Management

• SWE-084 - Configuration Audits

• A.08 Software Configuration Management

• SWE-051 - Software Requirements Analysis

• A.08 Software Configuration Management

• 8.54 - Software Requirements Analysis

• A.03 Software Requirements
• A.10 Software Peer Reviews and Inspections

• 8.55 - Software Design Analysis

• A.02 Software Assurance and Software Safety
• A.04 Software Design

• SWE-058 - Detailed Design
• SWE-205 - Determination of Safety-Critical Software

• 8.55 - Software Design Analysis

• A.02 Software Assurance and Software Safety
• A.04 Software Design

• SWE-051 - Software Requirements Analysis
• SWE-184 - Software-related Constraints and Assumptions

• 8.54 - Software Requirements Analysis
• 8.58 - Software Safety and Hazard Analysis

• A.02 Software Assurance and Software Safety
• A.03 Software Requirements

• SWE-058 - Detailed Design

• 8.55 - Software Design Analysis

• A.02 Software Assurance and Software Safety
• A.04 Software Design
• A.10 Software Peer Reviews and Inspections

• 8.55 - Software Design Analysis

• A.02 Software Assurance and Software Safety
• A.04 Software Design

• SWE-210 - Detection of Adversarial Actions

• 8.04 - Additional Requirements Considerations for Use with Safety-Critical Software

• A.01.08 Cybersecurity

• SWE-050 - Software Requirements
• SWE-051 - Software Requirements Analysis

• 7.10 - Peer Review and Inspections Including Checklists
• 8.54 - Software Requirements Analysis

• A.03 Software Requirements
• A.10 Software Peer Reviews and Inspections

• SWE-057 - Software Architecture

• 7.10 - Peer Review and Inspections Including Checklists
• 8.55 - Software Design Analysis

• A.04 Software Design
• A.10 Software Peer Reviews and Inspections

• SWE-058 - Detailed Design

• 8.55 - Software Design Analysis

• A.04 Software Design
• A.10 Software Peer Reviews and Inspections

• SWE-058 - Detailed Design

• 7.10 - Peer Review and Inspections Including Checklists
• 8.55 - Software Design Analysis

• A.04 Software Design
• A.10 Software Peer Reviews and Inspections

• SWE-060 - Coding Software

• 7.10 - Peer Review and Inspections Including Checklists
• 8.56 - Source Code Quality Analysis

• A.05 Software Implementation
• A.10 Software Peer Reviews and Inspections

• SWE-065 - Test Plan, Procedures, Reports

• 7.10 - Peer Review and Inspections Including Checklists
• 8.57 - Testing Analysis

• A.06 Software Testing
• A.10 Software Peer Reviews and Inspections