SWEs Distribution

Each SWE is listed with its Related SWEs, Related SM and Related Activities.

NPR 7150.2 Requirements	Related SWEs mentioned in other tabs primarily 3 and 7	Supplementary Materials: Related Topics, Document Structures, Principles, Checklists, and PATs, etc.	Related Activities in SWEs
SWE-033 - Acquisition vs. Development Assessment	SWE-015 - Cost Estimation SWE-027 - Use of Commercial, Government, and Legacy Software SWE-151 - Cost Estimate Conditions	6.3 - Checklist for Choosing a Real Time Operating System (RTOS) 7.03 - Acquisition Guidance 8.18 - SA Suggested Metrics PAT-025 - Checklist for Choosing a Real Time Operating System (RTOS)	A.01 Software Life Cycle Planning
SWE-013 - Software Plans	SWE-024 - Plan Tracking	5.06 - SCMP - Software Configuration Management Plan 5.08 - SDP-SMP - Software Development - Management Plan 5.17 - Software Assurance Plan Minimum Content 5.18 - Safety Plan Minimum Content 7.05 - Work Breakdown Structures That Include Software 7.08 - Maturity of Life Cycle Products at Milestone Reviews 7.18 - Documentation Guidance 8.12 - Basics of Software Auditing 8.15 - SA Tasking Checklist Tool 8.16 - SA Products 8.18 - SA Suggested Metrics 8.51 - Software Assurance Plan	A.01 Software Life Cycle Planning A.02 Software Assurance and Software Safety
SWE-024 - Plan Tracking	SWE-013 - Software Plans SWE-022 - Software Assurance SWE-018 - Software Activities Review SWE-022 - Software Assurance SWE-054 - Corrective Action for Inconsistencies SWE-080 - Track and Evaluate Changes SWE-082 - Authorizing Changes SWE-091 - Establish and Maintain Measurement Repository	5.01 - CR-PR - Software Change Request - Problem Report 5.06 - SCMP - Software Configuration Management Plan 5.08 - SDP-SMP - Software Development - Management Plan 5.10 - STP - Software Test Plan 7.08 - Maturity of Life Cycle Products at Milestone Reviews 7.18 – Documentation Guidance 8.18 - SA Suggested Metrics	A.01 Software Life Cycle Planning
SWE-034 - Acceptance Criteria	SWE-077 - Deliver Software Products SWE-191 - Software Regression Testing SWE-193 - Acceptance Testing for Affected System and Software Behavior	5.08 - SDP-SMP - Software Development - Management Plan 7.03 - Acquisition Guidance 7.06 - Software Test Estimation and Testing Levels 7.09 - Entrance and Exit Criteria 8.02 - Software Quality	A.03 Software Requirements
SWE-036 - Software Process Determination	SWE-003 - Center Improvement Plans SWE-004 - OCE Benchmarking SWE-005 - Software Processes SWE-037 - Software Milestones SWE-129 - OCE NPR Appraisals - SWE-209 - Benchmarking Software Assurance and Software Safety Capabilities SWE-221 - OSMA NPR Appraisals	5.04 - Maint - Software Maintenance Plan 5.06 - SCMP - Software Configuration Management Plan 5.08 - SDP-SMP - Software Development - Management Plan 5.10 - STP - Software Test Plan 7.08 - Maturity of Life Cycle Products at Milestone Reviews 7.18 - Documentation Guidance 8.16 - SA Products 8.18 - SA Suggested Metrics 8.51 - Software Assurance Plan	A.01 Software Life Cycle Planning A.13 NASA Institutional Requirements
SWE-037 - Software Milestones	SWE-018 - Software Activities Review SWE-036 - Software Process Determination	7.03 - Acquisition Guidance 7.08 - Maturity of Life Cycle Products at Milestone Reviews 7.09 - Entrance and Exit Criteria 8.05 - SW Failure Modes and Effects Analysis 8.06 - IV&V Surveillance 8.07 - Software Fault Tree Analysis 8.12 - Basics of Software Auditing 8.18 - SA Suggested Metrics	A.01 Software Life Cycle Planning
SWE-039 - Software Supplier Insight	SWE-040 - Access to Software Products SWE-042 - Source Code Electronic Access SWE-046 - Supplier Software Schedule	8.12 - Basics of Software Auditing 8.18 - SA Suggested Metrics	A.01 Software Life Cycle Planning
SWE-040 - Access to Software Products	SWE-027 - Use of Commercial, Government, and Legacy Software SWE-039 - Software Supplier Insight SWE-042 - Source Code Electronic Access SWE-052 - Bidirectional Traceability SWE-062 - Unit Test SWE-065 - Test Plan, Procedures, Reports SWE-066 - Perform Testing SWE-068 - Evaluate Test Results SWE-070 - Models, Simulations, Tools SWE-092 - Using Measurement Data SWE-093 - Analysis of Measurement Data SWE-094 - Reporting of Measurement Analysis SWE-125 - Requirements Compliance Matrix SWE-135 - Static Analysis SWE-136 - Software Tool Accreditation SWE-191 - Software Regression Testing	5.05 - Metrics - Software Metrics Report 5.07 - SDD - Software Data Dictionary 5.08 - SDP-SMP - Software Development - Management Plan 5.11 - STR - Software Test Report 5.12 - SUM - Software User Manual 5.13 - SwDD - Software Design Description 5.14 - Test - Software Test Procedures 5.16 - VDD - Version Description Document 7.03 - Acquisition Guidance	A.01 Software Life Cycle Planning
SWE-042 - Source Code Electronic Access	SWE-027 - Use of Commercial, Government, and Legacy Software SWE-039 - Software Supplier Insight SWE-040 - Access to Software Products SWE-077 - Deliver Software Products SWE-206 - Auto-Generation Software Inputs	5.06 - SCMP - Software Configuration Management Plan 5.08 - SDP-SMP - Software Development - Management Plan 5.12 - SUM - Software User Manual 5.16 - VDD - Version Description Document 7.03 - Acquisition Guidance	A.01 Software Life Cycle Planning
SWE-139 - Shall Statements	SWE-121 - Document Tailored Requirements SWE-126 - Tailoring Considerations SWE-140 - Comply with Requirements SWE-216 - Internal Software Sharing List	7.16 - Appendix C. Requirements Mapping and Compliance Matrix 8.18 - SA Suggested Metrics	A.01 Software Life Cycle Planning
SWE-121 - Document Tailored Requirements	SWE-032 - CMMI Levels for Class A and B Software SWE-125 - Requirements Compliance Matrix SWE-126 - Tailoring Considerations SWE-139 - Shall Statements SWE-141 - Software Independent Verification and Validation SWE-150 - Review Changes To Tailored Requirements	5.06 - SCMP - Software Configuration Management Plan 5.08 - SDP-SMP - Software Development - Management Plan 5.10 - STP - Software Test Plan 5.17 - Software Assurance Plan Minimum Content 5.18 - Safety Plan Minimum Content 5.20 - IV&V Project Execution Plan Minimum Content 8.18 - SA Suggested Metrics. 8.51 - Software Assurance Plan	A.01 Software Life Cycle Planning
SWE-125 - Requirements Compliance Matrix	SWE-020 - Software Classification SWE-121 - Document Tailored Requirements SWE-126 - Tailoring Considerations SWE-140 - Comply with Requirements SWE-150 - Review Changes To Tailored Requirements SWE-152 - Review Requirements Mapping Matrices SWE-212 - NASA-STD-8739 Mapping Matrices	5.08 - SDP-SMP - Software Development - Management Plan 7.16 - Appendix C. Requirements Mapping and Compliance Matrix 8.18 - SA Suggested Metrics. 8.51 - Software Assurance Plan PAT-028 - NPR 7150.2D Compliance Matrix	A.01 Software Life Cycle Planning
SWE-027 - Use of Commercial, Government, and Legacy Software	SWE-033 - Acquisition vs. Development Assessment SWE-040 - Access to Software Products SWE-042 - Source Code Electronic Access SWE-058 - Detailed Design SWE-077 - Deliver Software Products SWE-146 - Auto-generated Source Code SWE-147 - Specify Reusability Requirements SWE-156 - Evaluate Systems for Security Risks SWE-211 - Test Levels of Non-Custom Developed Software SWE-215 - Software License Rights SWE-217 - List of All Contributors and Disclaimer Notice	6.3 - Checklist for Choosing a Real Time Operating System (RTOS) 6.4 - Checklist for Choosing Off-The Shelf Software (OTS) 7.03 - Acquisition Guidance 7.07 - Software Architecture Description 8.02 - Software Quality 8.08 - COTS Software Safety Considerations 8.11 - Auto-Generated Code 8.18 - SA Suggested Metrics PAT-024 - Checklist for Choosing Off-The Shelf Software PAT-025 - Checklist for Choosing a Real Time Operating System (RTOS)	A.01 Software Life Cycle Planning
SWE-015 - Cost Estimation	SWE-016 - Software Schedule SWE-033 - Acquisition vs. Development Assessment SWE-046 - Supplier Software Schedule SWE-086 - Continuous Risk Management SWE-087 - Software Peer Reviews and Inspections for Requirements, Plans, Design, Code, and Test Procedures SWE-088 - Software Peer Reviews and Inspections - Checklist Criteria and Tracking SWE-142 - Software Cost Repositories SWE-151 - Cost Estimate Conditions	5.10 - STP - Software Test Plan 7.03 - Acquisition Guidance 7.06 - Software Test Estimation and Testing Levels 7.10 - Peer Review and Inspections Including Checklists 8.18 - SA Suggested Metrics	A.01 Software Life Cycle Planning
SWE-151 - Cost Estimate Conditions	SWE-015 - Cost Estimation SWE-033 - Acquisition vs. Development Assessment SWE-086 - Continuous Risk Management SWE-142 - Software Cost Repositories	8.18 - SA Suggested Metrics 8.51 - Software Assurance Plan	A.01 Software Life Cycle Planning
SWE-174 - Software Planning Parameters		5.08 - SDP-SMP - Software Development - Management Plan 7.08 - Maturity of Life Cycle Products at Milestone Reviews 7.18 - Documentation Guidance 8.18 - SA Suggested Metrics	A.01 Software Life Cycle Planning A.13 NASA Institutional Requirements
SWE-016 - Software Schedule	SWE-046 - Supplier Software Schedule	5.05 - Metrics - Software Metrics Report 5.08 - SDP-SMP - Software Development - Management Plan 7.08 - Maturity of Life Cycle Products at Milestone Reviews 8.12 - Basics of Software Auditing 8.18 - SA Suggested Metrics 8.51 - Software Assurance Plan	A.01 Software Life Cycle Planning
SWE-018 - Software Activities Review	SWE-020 - Software Classification SWE-024 - Plan Tracking SWE-037 - Software Milestones SWE-046 - Supplier Software Schedule SWE-079 - Develop CM Plan SWE-086 - Continuous Risk Management SWE-091 - Establish and Maintain Measurement Repository SWE-092 - Using Measurement Data SWE-093 - Analysis of Measurement Data SWE-094 - Reporting of Measurement Analysis	5.06 - SCMP - Software Configuration Management Plan 5.08 - SDP-SMP - Software Development - Management Plan 7.08 - Maturity of Life Cycle Products at Milestone Reviews 7.09 - Entrance and Exit Criteria 8.05 - SW Failure Modes and Effects Analysis 8.12 - Basics of Software Auditing 8.18 - SA Suggested Metrics 8.52 - Software Assurance Status Reports	A.01 Software Life Cycle Planning
SWE-046 - Supplier Software Schedule	SWE-016 - Software Schedule SWE-020 - Software Classification SWE-039 - Software Supplier Insight SWE-086 - Continuous Risk Management	5.05 - Metrics - Software Metrics Report 5.16 - VDD - Version Description Document 7.03 - Acquisition Guidance 7.05 - Work Breakdown Structures That Include Software 8.18 - SA Suggested Metrics	A.01 Software Life Cycle Planning
SWE-017 - Project and Software Training	SWE-100 - Software Training Funding SWE-222 - Software Assurance Training	5.08 - SDP-SMP - Software Development - Management Plan 5.15 - Train - Software Training Plan 8.18 - SA Suggested Metrics	A.01 Software Life Cycle Planning
SWE-020 - Software Classification	SWE-013 - Software Plans SWE-021 - Transition to a Higher Class SWE-125 - Requirements Compliance Matrix SWE-176 - Software Records	5.08 - SDP-SMP - Software Development - Management Plan 7.02 - Classification and Safety-Criticality 7.04 - Flow Down of NPR Requirements on Contracts and to Other Centers in Multi-Center Projects 7.13 - Transitioning to a Higher Class 7.16 - Appendix C. Requirements Mapping and Compliance Matrix 8.08 - COTS Software Safety Considerations 8.11 - Auto-Generated Code 8.18 - SA Suggested Metrics 8.51 - Software Assurance Plan	A.01 Software Life Cycle Planning
SWE-176 - Software Records	SWE-020 - Software Classification SWE-021 - Transition to a Higher Class SWE-129 - OCE NPR Appraisals	5.08 - SDP-SMP - Software Development - Management Plan 7.02 - Classification and Safety-Criticality 7.13 - Transitioning to a Higher Class 7.16 - Appendix C. Requirements Mapping and Compliance Matrix 8.18 - SA Suggested Metrics	A.01 Software Life Cycle Planning
SWE-021 - Transition to a Higher Class	SWE-020 - Software Classification SWE-152 - Review Requirements Mapping Matrices SWE-176 - Software Records	7.02 - Classification and Safety-Criticality 7.13 - Transitioning to a Higher Class 7.16 - Appendix C. Requirements Mapping and Compliance Matrix	A.01 Software Life Cycle Planning A.13 NASA Institutional Requirements
SWE-156 - Evaluate Systems for Security Risks	SWE-027 - Use of Commercial, Government, and Legacy Software SWE-147 - Specify Reusability Requirements SWE-154 - Identify Security Risks SWE-157 - Protect Against Unauthorized Access SWE-159 - Verify and Validate Risk Mitigations SWE-191 - Software Regression Testing SWE-205 - Determination of Safety-Critical Software	7.22 - Space Security: Best Practices Guide 7.25 - Artificial Intelligence And Software Engineering 8.04 - Additional Requirements Considerations for Use with Safety-Critical Software 8.08 - COTS Software Safety Considerations 8.18 - SA Suggested Metrics 8.25 - Artificial Intelligence And Software Assurance	A.01 Software Life Cycle Planning
SWE-154 - Identify Security Risks	SWE-156 - Evaluate Systems for Security Risks SWE-157 - Protect Against Unauthorized Access SWE-159 - Verify and Validate Risk Mitigations SWE-191 - Software Regression Testing SWE-210 - Detection of Adversarial Actions	7.22 - Space Security: Best Practices Guide 8.04 - Additional Requirements Considerations for Use with Safety-Critical Software 8.10 - Facility Software with Safety Considerations 8.18 - SA Suggested Metrics	A.01 Software Life Cycle Planning
SWE-157 - Protect Against Unauthorized Access	SWE-050 - Software Requirements SWE-051 - Software Requirements Analysis SWE-057 - Software Architecture SWE-058 - Detailed Design SWE-060 – Coding Software SWE-061 – Coding Standards SWE-062 – Unit Test SWE-063 Release Version Description SWE-135 – Static Analysis SWE-154 - Identify Security Risks SWE-156 - Evaluate Systems for Security Risks SWE-159 - Verify and Validate Risk Mitigations SWE-184 - Software-related Constraints and Assumptions SWE-185 - Secure Coding Standards Verification SWE-186 – Unit Test Repeatability SWE-210 - Detection of Adversarial Actions	8.04 - Additional Requirements Considerations for Use with Safety-Critical Software 8.18 - SA Suggested Metrics 8.55 - Software Design Analysis 8.56 - Source Code Quality Analysis	A.01 Software Life Cycle Planning
SWE-159 - Verify and Validate Risk Mitigations	SWE-087 - Software Peer Reviews and Inspections for Requirements, Plans, Design, Code, and Test Procedures SWE-088 - Software Peer Reviews and Inspections - Checklist Criteria and Tracking SWE-135 - Static Analysis SWE-154 - Identify Security Risks SWE-156 - Evaluate Systems for Security Risks SWE-157 - Protect Against Unauthorized Access SWE-185 - Secure Coding Standards Verification SWE-191 - Software Regression Testing SWE-207 - Secure Coding Practices	7.10 - Peer Review and Inspections Including Checklists 8.04 - Additional Requirements Considerations for Use with Safety-Critical Software 8.18 - SA Suggested Metrics	A.01 Software Life Cycle Planning
SWE-032 - CMMI Levels for Class A and B Software	SWE-003 - Center Improvement Plans SWE-129 - OCE NPR Appraisals SWE-221 - OSMA NPR Appraisals	7.03 - Acquisition Guidance 8.18 - SA Suggested Metrics	A.01 Software Life Cycle Planning A.13 NASA Institutional Requirements
SWE-152 - Review Requirements Mapping Matrices	SWE-125 - Requirements Compliance Matrix SWE-126 - Tailoring Considerations SWE-139 - Shall Statements SWE-140 - Comply with Requirements SWE-150 - Review Changes To Tailored Requirements	7.13 - Transitioning to a Higher Class 7.16 - Appendix C. Requirements Mapping and Compliance Matrix 8.51 - Software Assurance Plan PAT-052 - Software Assurance Reqts Mapping Matrix Assessment PAT-057 - Software Engineering Reqts Mapping Matrix Assessment	A.01 Software Life Cycle Planning A.13 NASA Institutional Requirements
SWE-098 - Agency Process Asset Library	SWE-003 - Center Improvement Plans		A.01 Software Life Cycle Planning A.13 NASA Institutional Requirements
SWE-214 - Internal Software Sharing and Reuse	SWE-148 - Contribute to Agency Software Catalog SWE-215 - Software License Rights SWE-216 - Internal Software Sharing List		A.01 Software Life Cycle Planning A.13 NASA Institutional Requirements
SWE-126 - Tailoring Considerations	SWE-121 - Document Tailored Requirements SWE-125 - Requirements Compliance Matrix SWE-139 - Shall Statements SWE-140 - Comply with Requirements SWE-150 - Review Changes To Tailored Requirements SWE-216 - Internal Software Sharing List	7.04 - Flow Down of NPR Requirements on Contracts and to Other Centers in Multi-Center Projects 7.16 - Appendix C. Requirements Mapping and Compliance Matrix 8.05 - SW Failure Modes and Effects Analysis	A.01 Software Life Cycle Planning A.13 NASA Institutional Requirements
SWE-153 - ETA Define Document Content		7.18 - Documentation Guidance 8.16 - SA Products 8.27 - Software Engineering and Software Assurance Checklists 8.58 - Software Safety and Hazard Analysis	A.01 Software Life Cycle Planning A.13 NASA Institutional Requirements
SWE-215 - Software License Rights	SWE-027 - Use of Commercial, Government, and Legacy Software SWE-214 - Internal Software Sharing and Reuse SWE-217 - List of All Contributors and Disclaimer Notice SWE-218 - Contracting Officers		A.01 Software Life Cycle Planning A.13 NASA Institutional Requirements
SWE-218 - Contracting Officers	SWE-215 - Software License Rights		A.01 Software Life Cycle Planning A.13 NASA Institutional Requirements
SWE-022 - Software Assurance	SWE-020 - Software Classification SWE-040 - Access to Software Products SWE-045 - Project Participation in Audits	5.05 - Metrics - Software Metrics Report 7.03 - Acquisition Guidance 8.12 - Basics of Software Auditing 8.18 - SA Suggested Metrics 8.51 - Software Assurance Plan 8.59 - Audit Reports	A.02 Software Assurance and Software Safety
SWE-141 - Software Independent Verification and Validation	SWE-126 - Tailoring Considerations SWE-131 - Independent Verification and Validation Project Execution Plan SWE-178 - IV&V Artifacts SWE-179 - IV&V Submitted Issues and Risks SWE-223 - Tailoring IV&V project selections	8.01 - Off Nominal Testing 8.11 - Auto-Generated Code 8.12 - Basics of Software Auditing 8.57 - Testing Analysis	A.02 Software Assurance and Software Safety
SWE-131 - Independent Verification and Validation Project Execution Plan	SWE-134 - Safety-Critical Software Design Requirements SWE-141 - Software Independent Verification and Validation SWE-178 - IV&V Artifacts	5.20 - IV&V Project Execution Plan Minimum Content 8.06 - IV&V Surveillance 8.53 - IV&V Project Execution Plan	A.02 Software Assurance and Software Safety A.06 Software Testing
SWE-178 - IV&V Artifacts	SWE-131 - Independent Verification and Validation Project Execution Plan SWE-141 - Software Independent Verification and Validation SWE-179 - IV&V Submitted Issues and Risks	8.53 - IV&V Project Execution Plan	A.02 Software Assurance and Software Safety
SWE-179 - IV&V Submitted Issues and Risks	SWE-080 - Track and Evaluate Changes SWE-086 - Continuous Risk Management SWE-141 - Software Independent Verification and Validation SWE-178 - IV&V Artifacts	8.18 - SA Suggested Metrics 8.53 - IV&V Project Execution Plan	A.02 Software Assurance and Software Safety
SWE-205 - Determination of Safety-Critical Software	SWE-023 - Software Safety-Critical Requirements SWE-062 - Unit Test SWE-065 - Test Plan, Procedures, Reports a SWE-068 - Evaluate Test Results SWE-134 - Safety-Critical Software Design Requirements SWE-154 - Identify Security Risks SWE-156 - Evaluate Systems for Security Risks SWE-184 - Software-related Constraints and Assumptions	7.02 - Classification and Safety-Criticality 7.25 - Artificial Intelligence And Software Engineering 8.01 - Off Nominal Testing 8.08 - COTS Software Safety Considerations 8.09 - Software Safety Analysis 8.18 - SA Suggested Metrics 8.25 - Artificial Intelligence And Software Assurance 8.58 - Software Safety and Hazard Analysis PAT-006 - Design Practices for Safety	A.01 Software Life Cycle Planning A.02 Software Assurance and Software Safety
SWE-023 - Software Safety-Critical Requirements	SWE-061 - Coding Standards SWE-062 - Unit Test SWE-065 - Test Plan, Procedures, Reports - ("a" portion) SWE-068 - Evaluate Test Results SWE-134 - Safety-Critical Software Design Requirements SWE-184 - Software-related Constraints and Assumptions SWE-205 - Determination of Safety-Critical Software SWE-220 - Cyclomatic Complexity for Safety-Critical Software	7.03 - Acquisition Guidance 7.04 - Flow Down of NPR Requirements on Contracts and to Other Centers in Multi-Center Projects 7.23 - Software Fault Prevention and Tolerance 8.01 - Off Nominal Testing 8.02 - Software Quality 8.10 - Facility Software with Safety Considerations 8.18 - SA Suggested Metrics 8.20 - Safety Specific Activities in Each Phase	A.02 Software Assurance and Software Safety
SWE-134 - Safety-Critical Software Design Requirements	SWE-023 - Software Safety-Critical Requirements SWE-184 - Software-related Constraints and Assumptions HR-33 - Inadvertent Operator Action	7.03 - Acquisition Guidance 7.21 - Multi-condition Software Requirements 7.23 - Software Fault Prevention and Tolerance 7.24 - Human Rated Software Requirements 8.01 - Off Nominal Testing 8.04 - Additional Requirements Considerations for Use with Safety-Critical Software 8.18 - SA Suggested Metrics PAT-035 - Checklist for Safety-Critical or Mission-Critical Software	A.02 Software Assurance and Software Safety A.03 Software Requirements
SWE-219 - Test Coverage for Safety Critical Software Components	SWE-135 - Static Analysis SWE-147 - Specify Reusability Requirements SWE-190 - Verify Code Coverage HR-33 - Inadvertent Operator Action	7.21 - Multi-condition Software Requirements 7.23 - Software Fault Prevention and Tolerance 8.08 - COTS Software Safety Considerations 8.18 - SA Suggested Metrics 8.57 - Testing Analysis	A.02 Software Assurance and Software Safety
SWE-220 - Cyclomatic Complexity Values for Safety-Critical Software	SWE-023 - Software Safety-Critical Requirements SWE-134 - Safety-Critical Software Design Requirements SWE-135 - Static Analysis HR-33 - Inadvertent Operator Action	7.21 - Multi-condition Software Requirements	A.02 Software Assurance and Software Safety
SWE-212 - NASA-STD-8739 Mapping Matrices	SWE-023 - Software Safety-Critical Requirements SWE-065 - Test Plan, Procedures, Reports SWE-125 - Requirements Compliance Matrix SWE-126 - Tailoring Considerations SWE-131 - Independent Verification and Validation Project Execution Plan SWE-139 - Shall Statements SWE-140 - Comply with Requirements SWE-150 - Review Changes To Tailored Requirements	7.16 - Appendix C. Requirements Mapping and Compliance Matrix 8.51 - Software Assurance Plan PAT-052 - Software Assurance Reqts Mapping Matrix Assessment PAT-057 - Software Engineering Reqts Mapping Matrix Assessment	A.01 Software Life Cycle Planning A.02 Software Assurance and Software Safety A.13 NASA Institutional Requirements
SWE-050 - Software Requirements	SWE-051 - Software Requirements Analysis SWE-052 - Bidirectional Traceability SWE-053 - Manage Requirements Changes SWE-054 - Corrective Action for Inconsistencies SWE-157 - Protect Against Unauthorized Access SWE-207 - Secure Coding Practices	5.02 - IDD - Interface Design Description 5.07 - SDD - Software Data Dictionary 5.09 - SRS - Software Requirements Specification 5.21 - Software Requirements Analysis Report Minimum Content 7.08 - Maturity of Life Cycle Products at Milestone Reviews 7.09 - Entrance and Exit Criteria 7.15 - Relationship Between NPR 7150.2 and NASA-STD-7009 7.18 - Documentation Guidance 7.24 - Human Rated Software Requirements 8.10 - Facility Software with Safety Considerations 8.18 - SA Suggested Metrics 8.54 - Software Requirements Analysis PAT-013 - Software Requirements Checklist PAT-034 - SA Requirements Analysis Checklist	A.03 Software Requirements
SWE-051 - Software Requirements Analysis	SWE-050 - Software Requirements SWE-052 - Bidirectional Traceability SWE-087 - Software Peer Reviews and Inspections for Requirements, Plans, Design, Code, and Test Procedures SWE-088 - Software Peer Reviews and Inspections - Checklist Criteria and Tracking SWE-089 - Software Peer Reviews and Inspections - Basic Measurements	5.08 - SDP-SMP - Software Development - Management Plan 5.21 - Software Requirements Analysis Report Minimum Content 7.09 - Entrance and Exit Criteria 7.10 - Peer Review and Inspections Including Checklists 7.24 - Human Rated Software Requirements 8.04 - Additional Requirements Considerations for Use with Safety-Critical Software 8.18 - SA Suggested Metrics 8.54 - Software Requirements Analysis 8.58 - Software Safety and Hazard Analysis PAT-003 - Functional Requirements Checklist PAT-004 - Safety Requirements Analysis Checklist PAT-007 - Checklist for General Software Safety Requirements PAT-013 - Software Requirements Checklist PAT-034 - SA Requirements Analysis Checklist PAT-042 - Requirements Development and Mgmt Audit PAT-056 - Software Development Management Plan Assessment PAT-059 - Software Requirements Specification Assessment PAT-079 - Requirements Quality Checklist PAT-080 - Requirements Contents Checklist PAT-081 - Requirements Editorial Checklist	A.03 Software Requirements
SWE-184 - Software-related Constraints and Assumptions	SWE-023 - Software Safety-Critical Requirements SWE-134 - Safety-Critical Software Design Requirements SWE-205 - Determination of Safety-Critical Software	5.09 - SRS - Software Requirements Specification 6.2 - Checklist for General Software Safety Requirements 8.01 - Off Nominal Testing 8.10 - Facility Software with Safety Considerations 8.18 - SA Suggested Metrics PAT-007 - Checklist for General Software Safety Requirements	A.03 Software Requirements
SWE-053 - Manage Requirements Changes	SWE-050 - Software Requirements SWE-051 - Software Requirements Analysis SWE-052 - Bidirectional Traceability SWE-080 - Track and Evaluate Changes SWE-082 - Authorizing Changes HR-33 - Inadvertent Operator Action	5.01 - CR-PR - Software Change Request - Problem Report 5.09 - SRS - Software Requirements Specification 7.18 - Documentation Guidance 8.18 - SA Suggested Metrics	A.03 Software Requirements
SWE-054 - Corrective Action for Inconsistencies	SWE-024 - Plan Tracking SWE-050 - Software Requirements SWE-053 - Manage Requirements Changes SWE-080 - Track and Evaluate Changes	5.01 - CR-PR - Software Change Request - Problem Report 5.08 - SDP-SMP - Software Development - Management Plan 8.18 - SA Suggested Metrics 8.51 - Software Assurance Plan	A.03 Software Requirements
SWE-055 - Requirements Validation	SWE-073 - Platform or Hi-Fidelity Simulations SWE-087 - Software Peer Reviews and Inspections for Requirements, Plans, Design, Code, and Test Procedures SWE-088 - Software Peer Reviews and Inspections - Checklist Criteria and Tracking HR-33 - Inadvertent Operator Action,	5.02 - IDD - Interface Design Description 5.08 - SDP-SMP - Software Development - Management Plan 5.09 - SRS - Software Requirements Specification 5.10 - STP - Software Test Plan 5.11 - STR - Software Test Report 5.13 - SwDD - Software Design Description 5.12 - SUM - Software User Manual 5.14 - Test - Software Test Procedures 7.09 - Entrance and Exit Criteria 7.10 - Peer Review and Inspections Including Checklists 7.15 - Relationship Between NPR 7150.2 and NASA-STD-7009 8.01 - Off Nominal Testing 8.18 - SA Suggested Metrics	A.03 Software Requirements
SWE-207 - Secure Coding Practices	SWE-050 - Software Requirements SWE-058 - Detailed Design SWE-156 - Evaluate Systems for Security Risks SWE-159 - Verify and Validate Risk Mitigations SWE-211 - Test Levels of Non-Custom Developed Software	8.04 - Additional Requirements Considerations for Use with Safety-Critical Software 8.18 - SA Suggested Metrics	A.01 Software Life Cycle Planning A.05 Software Implementation
SWE-185 - Verification of Software Code to Coding Standards	SWE-017 - Project and Software Training SWE-058 - Detailed Design SWE-060 - Coding Software SWE-061 - Coding Standards SWE-087 - Software Peer Reviews and Inspections for Requirements, Plans, Design, Code, and Test Procedures SWE-135 - Static Analysis SWE-136 - Software Tool Accreditation SWE-157 - Protect Against Unauthorized Access	7.10 - Peer Review and Inspections Including Checklists 8.04 - Additional Requirements Considerations for Use with Safety-Critical Software 8.18 - SA Suggested Metrics PAT-022 - Programming Practices Checklist	A.01 Software Life Cycle Planning A.05 Software Implementation
SWE-052 - Bidirectional Traceability	SWE-050 - Software Requirements SWE-051 - Software Requirements Analysis SWE-053 - Manage Requirements Changes SWE-058 - Detailed Design SWE-066 - Perform Testing SWE-071 - Update Test Plans and Procedures SWE-134 - Safety-Critical Software Design Requirements SWE-192 - Software Hazardous Requirements SWE-200 - Software Requirements Volatility Metrics	5.09 - SRS - Software Requirements Specification 5.13 - SwDD - Software Design Description 8.18 - SA Suggested Metrics 8.58 - Software Safety and Hazard Analysis	A.03 Software Requirements
SWE-057 - Software Architecture	SWE-050 - Software Requirements SWE-051 - Software Requirements Analysis SWE-058 - Detailed Design	5.13 - SwDD - Software Design Description 7.07 - Software Architecture Description 7.08 - Maturity of Life Cycle Products at Milestone Reviews 8.02 - Software Quality 8.18 - SA Suggested Metrics	A.04 Software Design
SWE-143 - Software Architecture Review	SWE-088 - Software Peer Reviews and Inspections - Checklist Criteria and Tracking SWE-089 - Software Peer Reviews and Inspections - Basic Measurements	7.09 - Entrance and Exit Criteria 7.10 - Peer Review and Inspections Including Checklists 8.18 - SA Suggested Metrics PAT-023 - Preparing for a SARB Checklist PAT-029 - Software Architecture Review Board Checklist PAT-030 - SARB Review Checklist with Guidance	A.04 Software Design
SWE-058 - Detailed Design	SWE-017 - Project and Software Training SWE-027 - Use of Commercial, Government, and Legacy Software SWE-036 - Software Process Determination SWE-052 - Bidirectional Traceability SWE-057 - Software Architecture SWE-060 - Coding Software SWE-061 - Coding Standards SWE-071 - Update Test Plans and Procedures SWE-080 - Track and Evaluate Changes SWE-087 - Software Peer Reviews and Inspections for Requirements, Plans, Design, Code, and Test Procedures SWE-136 - Software Tool Accreditation SWE-157 - Protect Against Unauthorized Access SWE-185 - Secure Coding Standards Verification SWE-205 - Determination of Safety-Critical Software SWE-207 - Secure Coding Practices	5.02 - IDD - Interface Design Description 5.06 - SCMP - Software Configuration Management Plan 5.07 - SDD - Software Data Dictionary 5.08 - SDP-SMP - Software Development - Management Plan 5.09 - SRS - Software Requirements Specification 5.12 - SUM - Software User Manual 5.13 - SwDD - Software Design Description 7.08 - Maturity of Life Cycle Products at Milestone Reviews 7.09 - Entrance and Exit Criteria 7.10 - Peer Review and Inspections Including Checklists 8.01 - Off Nominal Testing 8.05 - SW Failure Modes and Effects Analysis 8.18 - SA Suggested Metrics 8.55 - Software Design Analysis PAT-006 - Design Practices for Safety PAT-015 - Detailed Design Checklist PAT-016 - Functional Design Checklist PAT-021 - SADESIGN Checklist PAT-031 - Critical Design Analysis Checklist	A.04 Software Design
SWE-060 - Coding Software	SWE-058 - Detailed Design SWE-061 - Coding Standards SWE-062 - Unit Test SWE-136 - Software Tool Accreditation SWE-157 - Protect Against Unauthorized Access SWE-185 - Secure Coding Standards Verification	8.11 - Auto-Generated Code 8.18 - SA Suggested Metrics 8.19 - Dead / Dormant Code and Safety-Critical Software PAT-032 - Considerations When Using Interrupts	A.05 Software Implementation
SWE-061 - Coding Standards	SWE-013 - Software Plans SWE-023 - Software Safety-Critical Requirements SWE-060 - Coding Software SWE-087 - Software Peer Reviews and Inspections for Requirements, Plans, Design, Code, and Test Procedures SWE-157 - Protect Against Unauthorized Access SWE-185 - Secure Coding Standards Verification	6.5 - Checklist for C Programming Practices 6.6 - Checklist for C++ Programming Practices 6.7 - Checklist for Ada Programming Practices 6.8 - Checklist for Fortran Programming Practices 6.9 - Checklist for Generic (Non-Language-Specific) Programming Practices 6.10 - Checklist for General Good Programming Practices 6.11 - Examples of Programming Practices for Exception Handling 7.03 - Acquisition Guidance 7.10 - Peer Review and Inspections Including Checklists 8.18 - SA Suggested Metrics PAT-022 - Programming Practices Checklist	A.05 Software Implementation
SWE-135 - Static Analysis	SWE-040 - Access to Software Products SWE-061 - Coding Standards SWE-066 - Perform Testing SWE-087 - Software Peer Reviews and Inspections for Requirements, Plans, Design, Code, and Test Procedures SWE-157 - Protect Against Unauthorized Access SWE-185 - Secure Coding Standards Verification SWE-190 - Verify Code Coverage SWE-219 - Code Coverage for Safety Critical Software SWE-220 - Cyclomatic Complexity for Safety-Critical Software HR-33 - Inadvertent Operator Action	8.18 - SA Suggested Metrics 8.19 - Dead / Dormant Code and Safety-Critical Software 8.26 - Static Analysis	A.05 Software Implementation
SWE-062 - Unit Test	SWE-016 - Software Schedule SWE-017 - Project and Software Training SWE-066 - Perform Testing SWE-157 - Protect Against Unauthorized Access SWE-186 - Unit Test Repeatability SWE-190 - Verify Code Coverage SWE-191 - Software Regression Testing SWE-219 - Code Coverage for Safety Critical Software	5.06 - SCMP - Software Configuration Management Plan 5.08 - SDP-SMP - Software Development - Management Plan 5.10 - STP - Software Test Plan 7.06 - Software Test Estimation and Testing Levels 8.01 - Off Nominal Testing 8.18 - SA Suggested Metrics	A.05 Software Implementation
SWE-186 - Unit Test Repeatability	SWE-016 - Software Schedule SWE-017 - Project and Software Training SWE-062 - Unit Test SWE-066 - Perform Testing	5.06 - SCMP - Software Configuration Management Plan 5.08 - SDP-SMP - Software Development - Management Plan 5.10 - STP - Software Test Plan 8.18 - SA Suggested Metrics	A.05 Software Implementation
SWE-063 - Release Version Description	SWE-077 - Deliver Software Products SWE-083 - Status Accounting	5.16 - VDD - Version Description Document 7.18 - Documentation Guidance 8.18 - SA Suggested Metrics	A.05 Software Implementation
SWE-136 - Software Tool Accreditation	SWE-020 - Software Classification SWE-023 - Software Safety-Critical Requirements SWE-055 - Requirements Validation SWE-087 - Software Peer Reviews and Inspections for Requirements, Plans, Design, Code, and Test Procedures SWE-088 - Software Peer Reviews and Inspections - Checklist Criteria and Tracking SWE-089 - Software Peer Reviews and Inspections - Basic Measurements	7.10 - Peer Review and Inspections Including Checklists 8.18 - SA Suggested Metrics	A.05 Software Implementation
SWE-146 - Auto-generated Source Code	SWE-027 - Use of Commercial, Government, and Legacy Software SWE-136 - Software Tool Accreditation SWE-206 - Auto-Generation Software Inputs	8.11 - Auto-Generated Code 8.18 - SA Suggested Metrics	A.05 Software Implementation
SWE-206 - Auto-Generation Software Inputs	SWE-042 - Source Code Electronic Access SWE-146 - Auto-generated Source Code	8.11 - Auto-Generated Code 5.08 - SDP-SMP - Software Development - Management Plan	A.05 Software Implementation
SWE-065 - Test Plan, Procedures, Reports	SWE-023 - Software Safety-Critical Requirements SWE-065 - Test Plan, Procedures, Reports SWE-066 - Perform Testing SWE-071 - Update Test Plans and Procedures SWE-073 - Platform or Hi-Fidelity Simulations SWE-134 - Safety-Critical Software Design Requirements SWE-189 - Code Coverage Measurements SWE-191 - Software Regression Testing SWE-192 - Software Hazardous Requirements SWE-194 - Delivery Requirements Verification	5.10 - STP - Software Test Plan 5.11 - STR - Software Test Report 5.14 - Test - Software Test Procedures 7.06 - Software Test Estimation and Testing Levels 7.15 - Relationship Between NPR 7150.2 and NASA-STD-7009 7.18 - Documentation Guidance 8.01 - Off Nominal Testing 8.13 - Test Witnessing 8.18 - SA Suggested Metrics 8.57 - Testing Analysis	A.06 Software Testing
SWE-066 - Perform Testing	SWE-052 - Bidirectional Traceability SWE-062 - Unit Test SWE-065 - Test Plan, Procedures, Reports SWE-068 - Evaluate Test Results SWE-070 - Models, Simulations, Tools SWE-080 - Track and Evaluate Changes SWE-189 - Code Coverage Measurements SWE-190 - Verify Code Coverage SWE-191 - Software Regression Testing SWE-192 - Software Hazardous Requirements SWE-193 - Acceptance Testing for Affected System and Software Behavior HR-33 - Inadvertent Operator Action,	5.10 - STP - Software Test Plan 7.06 - Software Test Estimation and Testing Levels 7.15 - Relationship Between NPR 7150.2 and NASA-STD-7009 7.25 - Artificial Intelligence And Software Engineering 8.01 - Off Nominal Testing 8.02 - Software Quality 8.08 - COTS Software Safety Considerations 8.13 - Test Witnessing 8.18 - SA Suggested Metrics 8.19 - Dead / Dormant Code and Safety-Critical Software 8.25 - Artificial Intelligence And Software Assurance 8.57 - Testing Analysis PAT-026 - Test Review Checklist For Test Leads PAT-027 - Test Review Checklist For Review Teams	A.06 Software Testing
SWE-187 - Control of Software Items	SWE-079 - Develop CM Plan SWE-080 - Track and Evaluate Changes SWE-081 - Identify Software CM Items HR-33 - Inadvertent Operator Action	5.01 - CR-PR - Software Change Request - Problem Report 8.18 - SA Suggested Metrics	A.06 Software Testing
SWE-068 - Evaluate Test Results	SWE-065 - Test Plan, Procedures, Reports SWE-066 - Perform Testing SWE-068 - Evaluate Test Results SWE-070 - Models, Simulations, Tools SWE-071 - Update Test Plans and Procedures SWE-073 - Platform or Hi-Fidelity Simulations SWE-187 - Control of Software Items SWE-189 - Code Coverage Measurements SWE-190 - Verify Code Coverage SWE-191 - Software Regression Testing SWE-192 - Software Hazardous Requirements SWE-193 - Acceptance Testing for Affected System and Software Behavior SWE-211 - Test Levels of Non-Custom Developed Software HR-33 - Inadvertent Operator Action,	8.01 - Off Nominal Testing 8.18 - SA Suggested Metrics 8.57 - Testing Analysis	A.06 Software Testing
SWE-070 - Models, Simulations, Tools	SWE-066 - Perform Testing HR-33 - Inadvertent Operator Action,	7.15 - Relationship Between NPR 7150.2 and NASA-STD-7009 7.25 - Artificial Intelligence And Software Engineering 8.11 - Auto-Generated Code 8.18 - SA Suggested Metrics 8.25 - Artificial Intelligence And Software Assurance	A.06 Software Testing
SWE-071 - Update Test Plans and Procedures	SWE-052 - Bidirectional Traceability SWE-065 - Test Plan, Procedures, Reports SWE-080 - Track and Evaluate Changes SWE-191 - Software Regression Testing SWE-194 - Delivery Requirements Verification HR-33 - Inadvertent Operator Action	5.14 - Test - Software Test Procedures 7.18 - Documentation Guidance 8.01 - Off Nominal Testing 8.18 - SA Suggested Metrics	A.06 Software Testing
SWE-073 - Platform or Hi-Fidelity Simulations	SWE-055 - Requirements Validation SWE-065 - Test Plan, Procedures, Reports SWE-068 - Evaluate Test Results HR-33 - Inadvertent Operator Action	7.15 - Relationship Between NPR 7150.2 and NASA-STD-7009 8.18 - SA Suggested Metrics	A.06 Software Testing
SWE-189 - Code Coverage Measurements	SWE-065 - Test Plan, Procedures, Reports SWE-066 - Perform Testing SWE-190 - Verify Code Coverage HR-33 - Inadvertent Operator Action	8.18 - SA Suggested Metrics 8.19 - Dead / Dormant Code and Safety-Critical Software	A.06 Software Testing
SWE-190 - Verify Code Coverage	SWE-062 - Unit Test SWE-135 - Static Analysis SWE-189 - Code Coverage Measurements SWE-219 - Code Coverage for Safety Critical Software	5.08 - SDP-SMP - Software Development - Management Plan 5.10 - STP - Software Test Plan 7.06 - Software Test Estimation and Testing Levels 7.21 - Multi-condition Software Requirements 8.18 - SA Suggested Metrics 8.19 - Dead / Dormant Code and Safety-Critical Software 8.20 - Safety Specific Activities in Each Phase	A.06 Software Testing
SWE-191 - Software Regression Testing	SWE-034 - Acceptance Criteria SWE-062 - Unit Test SWE-065 - Test Plan, Procedures, Reports SWE-066 - Perform Testing SWE-068 - Evaluate Test Results SWE-071 - Update Test Plans and Procedures SWE-087 - Software Peer Reviews and Inspections for Requirements, Plans, Design, Code, and Test Procedures SWE-154 - Identify Security Risks SWE-156 - Evaluate Systems for Security Risks SWE-194 - Delivery Requirements Verification SWE-205 - Determination of Safety-Critical Software	5.10 - STP - Software Test Plan, 5.11 - STR - Software Test Report 5.14 - Test - Software Test Procedures 7.06 - Software Test Estimation and Testing Levels 7.10 - Related Activities 8.18 - SA Suggested Metrics	A.06 Software Testing
SWE-192 - Software Hazardous Requirements	SWE-052 - Bidirectional Traceability SWE-065 - Test Plan, Procedures, Reports SWE-066 - Perform Testing SWE-068 - Evaluate Test Results SWE-071 - Update Test Plans and Procedures SWE-189 - Code Coverage Measurements SWE-190 - Verify Code Coverage SWE-193 - Acceptance Testing for Affected System and Software Behavior SWE-205 - Determination of Safety-Critical Software HR-33 - Inadvertent Operator Action	8.01 - Off Nominal Testing 8.05 - SW Failure Modes and Effects Analysis 8.08 - COTS Software Safety Considerations 8.16 - SA Products 8.18 - SA Suggested Metrics 8.54 - Software Requirements Analysis 8.57 - Testing Analysis	A.06 Software Testing
SWE-193 - Acceptance Testing for Affected System and Software Behavior	SWE-034 - Acceptance Criteria SWE-066 - Perform Testing SWE-068 - Evaluate Test Results	5.08 - SDP-SMP - Software Development - Management Plan 5.11 - STR - Software Test Report 7.09 - Entrance and Exit Criteria 8.01 - Off Nominal Testing	A.06 Software Testing
SWE-211 - Test Levels of Non-Custom Developed Software	SWE-027 - Use of Commercial, Government, and Legacy Software	7.25 - Artificial Intelligence And Software Engineering 8.08 - COTS Software Safety Considerations 8.18 - SA Suggested Metrics 8.25 - Artificial Intelligence And Software Assurance	A.06 Software Testing
SWE-210 - Detection of Adversarial Actions	SWE-154 - Identify Security Risks SWE-157 - Protect Against Unauthorized Access	8.04 - Additional Requirements Considerations for Use with Safety-Critical Software 8.18 - SA Suggested Metrics	A.01 Software Life Cycle Planning A.06 Software Testing
SWE-075 - Plan Operations, Maintenance, Retirement	SWE-077 - Deliver Software Products SWE-194 - Delivery Requirements Verification SWE-195 - Software Maintenance Phase SWE-196 - Software Retirement Archival	5.04 - Maint - Software Maintenance Plan 5.16 - VDD - Version Description Document 7.08 - Maturity of Life Cycle Products at Milestone Reviews 7.18 - Documentation Guidance 8.18 - SA Suggested Metrics	A.07 Software Release, Operations, Maintenance, and Retirement
SWE-077 - Deliver Software Products	SWE-020 - Software Classification SWE-027 - Use of Commercial, Government, and Legacy Software SWE-034 - Acceptance Criteria SWE-042 - Source Code Electronic Access SWE-063 - Release Version Description SWE-075 - Plan Operations, Maintenance, Retirement, SWE-085 - Release Management	5.12 - SUM - Software User Manual 5.16 - VDD - Version Description Document 7.03 - Acquisition Guidance 7.18 - Documentation Guidance 8.18 - SA Suggested Metrics	A.07 Software Release, Operations, Maintenance, and Retirement
SWE-194 - Delivery Requirements Verification	SWE-052 - Bidirectional Traceability SWE-053 - Manage Requirements Changes SWE-065 - Test Plan, Procedures, Reports SWE-066 - Perform Testing SWE-068 - Evaluate Test Results SWE-071 - Update Test Plans and Procedures SWE-075 - Plan Operations, Maintenance, Retirement SWE-080 - Track and Evaluate Changes SWE-085 - Release Management SWE-191 - Software Regression Testing HR-33 - Inadvertent Operator Action	5.01 - CR-PR - Software Change Request - Problem Report 8.18 - SA Suggested Metrics	A.07 Software Release, Operations, Maintenance, and Retirement
SWE-195 - Software Maintenance Phase	SWE-020 - Software Classification SWE-075 - Plan Operations, Maintenance, Retirement	5.04 - Maint - Software Maintenance Plan 5.08 - SDP-SMP - Software Development - Management Plan 7.18 - Documentation Guidance 8.18 - SA Suggested Metrics	A.07 Software Release, Operations, Maintenance, and Retirement
SWE-196 - Software Retirement Archival	SWE-075 - Plan Operations, Maintenance, Retirement	7.18 - Documentation Guidance 5.08 - SDP-SMP - Software Development - Management Plan	A.07 Software Release, Operations, Maintenance, and Retirement
SWE-147 - Specify Reusability Requirements	SWE-027 - Use of Commercial, Government, and Legacy Software SWE-148 - Contribute to Agency Software Catalog SWE-156 - Evaluate Systems for Security Risks SWE-217 - List of All Contributors and Disclaimer Notice SWE-219 - Code Coverage for Safety Critical Software	8.11 - Auto-Generated Code 8.18 - SA Suggested Metrics	A.01 Software Life Cycle Planning A.07 Software Release, Operations, Maintenance, and Retirement
SWE-148 - Contribute to Agency Software Catalog	SWE-147 - Specify Reusability Requirements SWE-214 - Internal Software Sharing and Reuse	8.18 - SA Suggested Metrics	A.01 Software Life Cycle Planning A.07 Software Release, Operations, Maintenance, and Retirement
SWE-217 - List of All Contributors and Disclaimer Notice	SWE-027 - Use of Commercial, Government, and Legacy Software SWE-215 - Software License Rights		A.01 Software Life Cycle Planning A.07 Software Release, Operations, Maintenance, and Retirement A.13 NASA Institutional Requirements
SWE-216 - Internal Software Sharing List	SWE-125 - Requirements Compliance Matrix SWE-126 - Tailoring Considerations SWE-139 - Shall Statements SWE-214 - Internal Software Sharing and Reuse	7.16 - Appendix C. Requirements Mapping and Compliance Matrix 8.15 - SA Tasking Checklist Tool 8.27 - Software Engineering and Software Assurance Checklists 8.51 - Software Assurance Plan 8.59 - Audit Reports	A.01 Software Life Cycle Planning A.07 Software Release, Operations, Maintenance, and Retirement A.13 NASA Institutional Requirements
SWE-079 - Develop CM Plan	SWE-080 - Track and Evaluate Changes SWE-081 - Identify Software CM Items SWE-082 - Authorizing Changes SWE-084 - Configuration Audits SWE-085 - Release Management SWE-087 - Software Peer Reviews and Inspections for Requirements, Plans, Design, Code, and Test Procedures SWE-187 - Control of Software Items	5.06 - SCMP - Software Configuration Management Plan 7.08 - Maturity of Life Cycle Products at Milestone Reviews 7.10 - Peer Review and Inspections Including Checklists 7.18 - Documentation Guidance 8.18 - SA Suggested Metrics	A.08 Software Configuration Management
SWE-080 - Track and Evaluate Changes	SWE-024 - Plan Tracking SWE-053 - Manage Requirements Changes SWE-054 - Corrective Action for Inconsistencies SWE-058 - Detailed Design SWE-066 - Perform Testing SWE-071 - Update Test Plans and Procedures SWE-079 - Develop CM Plan SWE-082 - Authorizing Changes SWE-083 - Status Accounting SWE-179 - IV&V Submitted Issues and Risks SWE-187 - Control of Software Items SWE-202 - Software Severity Levels HR-33 - Inadvertent Operator Action	5.01 - CR-PR - Software Change Request - Problem Report 8.18 - SA Suggested Metrics	A.08 Software Configuration Management
SWE-081 - Identify Software CM Items	SWE-079 - Develop CM Plan SWE-082 - Authorizing Changes SWE-085 - Release Management SWE-187 - Control of Software Items	5.06 - SCMP - Software Configuration Management Plan 7.15 - Relationship Between NPR 7150.2 and NASA-STD-7009 7.18 - Documentation Guidance 8.11 - Auto-Generated Code 8.18 - SA Suggested Metrics	A.08 Software Configuration Management
SWE-082 - Authorizing Changes	SWE-024 - Plan Tracking SWE-053 - Manage Requirements Changes SWE-079 - Develop CM Plan SWE-080 - Track and Evaluate Changes SWE-081 - Identify Software CM Items	5.01 - CR-PR - Software Change Request - Problem Report 5.06 - SCMP - Software Configuration Management Plan 5.08 - SDP-SMP - Software Development - Management Plan 5.16 - VDD - Version Description Document 8.18 - SA Suggested Metrics	A.08 Software Configuration Management
SWE-083 - Status Accounting	SWE-063 - Release Version Description SWE-079 - Develop CM Plan SWE-080 - Track and Evaluate Changes SWE-084 - Configuration Audits SWE-085 - Release Management	5.01 - CR-PR - Software Change Request - Problem Report 5.06 - SCMP - Software Configuration Management Plan	A.08 Software Configuration Management
SWE-084 - Configuration Audits	SWE-079 - Develop CM Plan SWE-083 - Status Accounting SWE-085 - Release Management	5.06 - SCMP - Software Configuration Management Plan 8.18 - SA Suggested Metrics PAT-037 - Configuration Management Process Audit	A.08 Software Configuration Management
SWE-085 - Release Management	SWE-077 - Deliver Software Products SWE-079 - Develop CM Plan SWE-081 - Identify Software CM Items SWE-083 - Status Accounting SWE-084 - Configuration Audits SWE-194 - Delivery Requirements Verification	5.01 - CR-PR - Software Change Request - Problem Report 5.06 - SCMP - Software Configuration Management Plan 5.16 - VDD - Version Description Document 8.12 - Basics of Software Auditing 8.18 - SA Suggested Metrics	A.08 Software Configuration Management
SWE-045 - Project Participation in Audits	SWE-022 - Software Assurance	7.03 - Acquisition Guidance 8.12 - Basics of Software Auditing 8.16 - SA Products	A.08 Software Configuration Management
SWE-086 - Continuous Risk Management	SWE-015 - Cost Estimation SWE-086 - Continuous Risk Management SWE-151 - Cost Estimate Conditions SWE-179 - IV&V Submitted Issues and Risks	5.05 - Metrics - Software Metrics Report 5.08 - SDP-SMP - Software Development - Management Plan 7.03 - Acquisition Guidance 7.04 - Flow Down of NPR Requirements on Contracts and to Other Centers in Multi-Center Projects 7.15 - Relationship Between NPR 7150.2 and NASA-STD-7009 7.19 - Software Risk Management Checklists 8.05 - SW Failure Modes and Effects Analysis 8.06 - IV&V Surveillance 8.10 - Facility Software with Safety Considerations 8.12 - Basics of Software Auditing 8.18 - SA Suggested Metrics 8.24 - Software Assurance Risk	A.09 Software Risk Management
SWE-087 - Software Peer Reviews and Inspections for Requirements, Plans, Design, Code, and Test Procedures	SWE-013 - Software Plans SWE-015 - Cost Estimation SWE-016 - Software Schedule SWE-017 - Project and Software Training SWE-018 - Software Activities Review SWE-020 - Software Classification SWE-022 - Software Assurance SWE-023 - Software Safety-Critical Requirements SWE-024 - Plan Tracking SWE-034 - Acceptance Criteria SWE-036 - Software Process Determination SWE-037 - Software Milestones SWE-046 - Supplier Software Schedule SWE-050 - Software Requirements SWE-057 - Software Architecture SWE-058 - Detailed Design SWE-060 - Coding Software SWE-062 - Unit Test SWE-065 - Test Plan, Procedures, Reports SWE-075 - Plan Operations, Maintenance, Retirement SWE-077 - Deliver Software Products SWE-079 - Develop CM Plan SWE-085 - Release Management SWE-086 - Continuous Risk Management SWE-088 - Software Peer Reviews and Inspections - Checklist Criteria and Tracking SWE-089 - Software Peer Reviews and Inspections - Basic Measurements SWE-090 - Management and Technical Measurements SWE-093 - Analysis of Measurement Data SWE-121 - Document Tailored Requirements SWE-125 - Requirements Compliance Matrix SWE-131 - Independent Verification and Validation Project Execution Plan SWE-134 - Safety-Critical Software Design Requirements SWE-141 - Software Independent Verification and Validation SWE-178 - IV&V Artifacts SWE-190 - Verify Code Coverage SWE-191 - Software Regression Testing SWE-192 - Software Hazardous Requirements SWE-194 - Delivery Requirements Verification SWE-201 - Software Non-Conformances SWE-211 - Test Levels of Non-Custom Developed Software	5.01 - CR-PR - Software Change Request - Problem Report 5.02 - IDD - Interface Design Description 5.03 - Inspect - Software Inspection, Peer Reviews, Inspections 5.04 - Maint - Software Maintenance Plan 5.05 - Metrics - Software Metrics Report 5.06 - SCMP - Software Configuration Management Plan 5.07 - SDD - Software Data Dictionary 5.08 - SDP-SMP - Software Development - Management Plan 5.09 - SRS - Software Requirements Specification 5.10 - STP - Software Test Plan 5.11 - STR - Software Test Report 5.12 - SUM - Software User Manual 5.13 - SwDD - Software Design Description 5.14 - Test - Software Test Procedures 5.15 - Train - Software Training Plan 5.16 - VDD - Version Description Document 7.06 - Software Test Estimation and Testing Levels 7.10 - Peer Review and Inspections Including Checklists 7.16 - Appendix C. Requirements Mapping and Compliance Matrix 7.19 - Software Risk Management Checklists 8.05 - SW Failure Modes and Effects Analysis 8.18 - SA Suggested Metrics 8.24 - Software Assurance Risk 8.51 - Software Assurance Plan 8.53 - IV&V Project Execution Plan 8.54 - Software Requirements Analysis 8.55 - Software Design Analysis 8.56 - Source Code Quality Analysis 8.57 - Testing Analysis 8.58 - Software Safety and Hazard Analysis	A.10 Software Peer Reviews and Inspections
SWE-088 - Software Peer Reviews and Inspections - Checklist Criteria and Tracking	SWE-087 - Software Peer Reviews and Inspections for Requirements, Plans, Design, Code, and Test Procedures SWE-089 - Software Peer Reviews and Inspections - Basic Measurements	5.03 - Inspect - Software Inspection, Peer Reviews, Inspections 7.10 - Peer Review and Inspections Including Checklists 8.12 - Basics of Software Auditing 8.18 - SA Suggested Metrics	A.10 Software Peer Reviews and Inspections
SWE-089 - Software Peer Reviews and Inspections - Basic Measurements	SWE-087 - Software Peer Reviews and Inspections for Requirements, Plans, Design, Code, and Test Procedures,	5.03 - Inspect - Software Inspection, Peer Reviews, Inspections 7.10 - Peer Review and Inspections Including Checklists 8.18 - SA Suggested Metrics	A.10 Software Peer Reviews and Inspections
SWE-090 - Management and Technical Measurements	SWE-091 - Establish and Maintain Measurement Repository SWE-092 - Using Measurement Data SWE-093 - Analysis of Measurement Data SWE-094 - Reporting of Measurement Analysis	5.05 - Metrics - Software Metrics Report 5.08 - SDP-SMP - Software Development - Management Plan 7.14 - Implementing Measurement Requirements and Analysis for Projects 8.18 - SA Suggested Metrics	A.11 Software Measurements
SWE-093 - Analysis of Measurement Data	SWE-090 - Management and Technical Measurements SWE-091 - Establish and Maintain Measurement Repository SWE-092 - Using Measurement Data SWE-094 - Reporting of Measurement Analysis	5.05 - Metrics - Software Metrics Report 5.08 - SDP-SMP - Software Development - Management Plan 7.14 - Implementing Measurement Requirements and Analysis for Projects 8.18 - SA Suggested Metrics.	A.11 Software Measurements
SWE-094 - Reporting of Measurement Analysis	SWE-090 - Management and Technical Measurements SWE-091 - Establish and Maintain Measurement Repository SWE-092 - Using Measurement Data SWE-093 - Analysis of Measurement Data	5.05 - Metrics - Software Metrics Report 7.14 - Implementing Measurement Requirements and Analysis for Projects 8.18 - SA Suggested Metrics	A.11 Software Measurements
SWE-199 - Performance Measures	SWE-195 - Software Maintenance Phase	5.04 - Maint - Software Maintenance Plan 7.09 - Entrance and Exit Criteria 8.18 - SA Suggested Metrics 8.52 - Software Assurance Status Reports	A.11 Software Measurements
SWE-200 - Software Requirements Volatility Metrics	SWE-052 - Bidirectional Traceability SWE-094 - Reporting of Measurement Analysis HR-33 - Inadvertent Operator Action	5.01 - CR-PR - Software Change Request - Problem Report 8.18 - SA Suggested Metrics	A.11 Software Measurements
SWE-201 - Software Non-Conformances	SWE-202 - Software Severity Levels SWE-204 - Process Assessments	5.01 - CR-PR - Software Change Request - Problem Report 8.08 - COTS Software Safety Considerations 8.18 - SA Suggested Metrics	A.12 Software Non-conformance or Defect Management
SWE-202 - Software Severity Levels	SWE-080 - Track and Evaluate Changes SWE-201 - Software Non-Conformances	5.01 - CR-PR - Software Change Request - Problem Report 8.08 - COTS Software Safety Considerations 8.18 - SA Suggested Metrics	A.12 Software Non-conformance or Defect Management
SWE-203 - Mandatory Assessments for Non-Conformances	SWE-201 - Software Non-Conformances SWE-204 - Process Assessments	5.01 - CR-PR - Software Change Request - Problem Report 8.08 - COTS Software Safety Considerations 8.18 - SA Suggested Metrics	A.12 Software Non-conformance or Defect Management
SWE-204 - Process Assessments	SWE-201 - Software Non-Conformances SWE-202 - Software Severity Levels SWE-203 - Mandatory Assessments for Non-Conformances	8.18 - SA Suggested Metrics	A.12 Software Non-conformance or Defect Management
SWE-004 - OCE Benchmarking	SWE-003 - Center Improvement Plans SWE-032 - CMMI Levels for Class A and B Software SWE-036 - Software Process Determination SWE-129 - OCE NPR Appraisals SWE-221 - OSMA NPR Appraisals		A.13 NASA Institutional Requirements
SWE-209 - Benchmarking Software Assurance and Software Safety Capabilities	SWE-002 - Software Engineering Initiative SWE-032 - CMMI Levels for Class A and B Software SWE-036 - Software Process Determination SWE-098 - Agency Process Asset Library	7.16 - Appendix C. Requirements Mapping and Compliance Matrix 8.12 - Basics of Software Auditing	A.13 NASA Institutional Requirements
SWE-221 - OSMA NPR Appraisals	SWE-004 - OCE Benchmarking SWE-036 - Software Process Determination SWE-126 - Tailoring Considerations SWE-129 - OCE NPR Appraisals SWE-139 - Shall Statements	7.18 - Documentation Guidance 8.12 - Basics of Software Auditing 8.16 - SA Products 8.59 - Audit Reports	A.13 NASA Institutional Requirements
SWE-129 - OCE NPR Appraisals	SWE-004 - OCE Benchmarking SWE-036 - Software Process Determination SWE-126 - Tailoring Considerations SWE-139 - Shall Statements SWE-221 - OSMA NPR Appraisals		A.13 NASA Institutional Requirements
SWE-144 - Software Engineering Process Assets	SWE-098 - Agency Process Asset Library		A.13 NASA Institutional Requirements
SWE-002 - Software Engineering Initiative	SWE-003 - Center Improvement Plan SWE-004 - OCE Benchmarking SWE-005 - Software Processes SWE-095 - Report Engineering Discipline Status SWE-100 - Software Training Funding SWE-129 - OCE NPR Appraisals SWE-208 - Advancing Software Assurance and Software Safety Practices SWE-209 - Benchmarking Software Assurance and Software Safety Capabilities SWE-221 - OSMA NPR Appraisals SWE-222 - Software Assurance Training	7.01 - History and Overview of the Software Process Improvement (SPI) Effort	A.13 NASA Institutional Requirements
SWE-208 - Advancing Software Assurance and Software Safety Practices	SWE-002 - Software Engineering Initiative SWE-003 - Center Improvement Plans SWE-032 - CMMI Levels for Class A and B Software SWE-086 - Continuous Risk Management	7.01 - History and Overview of the Software Process Improvement (SPI) Effort 8.05 - SW Failure Modes and Effects Analysis 8.07 - Software Fault Tree Analysis 8.18 - SA Suggested Metrics	A.13 NASA Institutional Requirements
SWE-003 - Center Improvement Plans	SWE-002 - Software Engineering Initiative SWE-005 - Software Processes SWE-032 - CMMI Levels for Class A and B Software SWE-036 - Software Process Determination SWE-095 - Report Engineering Discipline Status SWE-098 - Agency Process Asset Library SWE-208 - Advancing Software Assurance and Software Safety Practices	7.01 - History and Overview of the Software Process Improvement (SPI) Effort	A.13 NASA Institutional Requirements
SWE-005 - Software Processes	SWE-002 - Software Engineering Initiative SWE-003 - Center Improvement Plans SWE-013 - Software Plans SWE-032 - CMMI Levels for Class A and B Software SWE-036 - Software Process Determination	7.01 - History and Overview of the Software Process Improvement (SPI) Effort 7.09 - Entrance and Exit Criteria	A.13 NASA Institutional Requirements
SWE-095 - Report Engineering Discipline Status	SWE-002 - Software Engineering Initiative SWE-065 - Test Plan, Procedures, Reports SWE-071 - Update Test Plans and Procedures SWE-091 - Establish and Maintain Measurement Repository SWE-094 - Reporting of Measurement Analysis SWE-125 - Requirements Compliance Matrix	5.05 - Metrics - Software Metrics Report 7.01 - History and Overview of the Software Process Improvement (SPI) Effort	A.13 NASA Institutional Requirements
SWE-006 - Center Software Inventory	SWE-020 - Software Classification	7.02 - Classification and Safety-Criticality 7.04 - Flow Down of NPR Requirements on Contracts and to Other Centers in Multi-Center Projects	A.01 Software Life Cycle Planning A.13 NASA Institutional Requirements
SWE-091 - Establish and Maintain Measurement Repository	SWE-090 - Management and Technical Measurements SWE-092 - Using Measurement Data SWE-093 - Analysis of Measurement Data SWE-094 - Reporting of Measurement Analysis	5.05 - Metrics - Software Metrics Report 5.08 - SDP-SMP - Software Development - Management Plan 7.14 - Implementing Measurement Requirements and Analysis for Projects	A.11 Software Measurements A.13 NASA Institutional Requirements
SWE-092 - Using Measurement Data	SWE-018 - Software Activities Review SWE-040 - Access to Software Products SWE-090 - Management and Technical Measurements SWE-091 - Establish and Maintain Measurement Repository SWE-093 - Analysis of Measurement Data SWE-094 - Reporting of Measurement Analysis	5.05 - Metrics - Software Metrics Report 7.14 - Implementing Measurement Requirements and Analysis for Projects 8.18 - SA Suggested Metrics	A.11 Software Measurements A.13 NASA Institutional Requirements
SWE-142 - Software Cost Repositories	SWE-015 - Cost Estimation SWE-090 - Management and Technical Measurements SWE-091 - Establish and Maintain Measurement Repository SWE-151 - Cost Estimate Conditions		A.01 Software Life Cycle Planning A.13 NASA Institutional Requirements
SWE-150 - Review Changes To Tailored Requirements	SWE-121 - Document Tailored Requirements SWE-125 - Requirements Compliance Matrix SWE-126 - Tailoring Considerations	7.16 - Appendix C. Requirements Mapping and Compliance Matrix	A.01 Software Life Cycle Planning A.13 NASA Institutional Requirements
SWE-140 - Comply with Requirements	SWE-029 - Validation Planning SWE-050 - Software Requirements SWE-052 - Bidirectional Traceability SWE-065 - Test Plan, Procedures, Reports SWE-071 - Update Test Plans and Procedures SWE-080 - Track and Evaluate Changes SWE-085 - Release Management SWE-086 - Continuous Risk Management SWE-125 - Requirements Compliance Matrix SWE-126 - Tailoring Considerations SWE-134 - Safety-Critical Software Design Requirements SWE-139 - Shall Statements SWE-152 - Review Requirements Mapping Matrices SWE-212 - NASA-STD-8739 Mapping Matrices	7.16 - Appendix C. Requirements Mapping and Compliance Matrix 8.12 - Basics of Software Auditing 8.15 - SA Tasking Checklist Tool 8.51 - Software Assurance Plan 8.59 - Audit Reports	A.01 Software Life Cycle Planning A.13 NASA Institutional Requirements
SWE-223 - Tailoring IV&V project selections	SWE-131 - Independent Verification and Validation Project Execution Plan SWE-141 - Software Independent Verification and Validation	5.20 - IV&V Project Execution Plan Minimum Content 8.06 - IV&V Surveillance 8.53 - IV&V Project Execution Plan	A.01 Software Life Cycle Planning A.02 Software Assurance and Software Safety A.06 Software Testing A.13 NASA Institutional Requirements
SWE-100 - Software Training Funding	SWE-017 - Project and Software Training SWE-222 - Software Assurance Training	8.07 - Software Fault Tree Analysis 8.05 - SW Failure Modes and Effects Analysis	A.01 Software Life Cycle Planning A.13 NASA Institutional Requirements
SWE-222 - Software Assurance Training	SWE-017 - Project and Software Training SWE-126 - Tailoring Considerations SWE-100 - Software Training Funding	5.15 - Train - Software Training Plan	A.01 Software Life Cycle Planning A.13 NASA Institutional Requirements

Content

Space Tools

SWEs Distribution