bannera

Book A.
Introduction

Book B.
7150 Requirements Guidance

Book C.
Topics

Tools,
References, & Terms

SPAN
(NASA Only)

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 183 Next »

Unknown macro: {menuicon}

This section contains guidance, rationale, and lists of useful resources and tools related to each and every one of the requirements in NPR 7150.2. You can use the table below to link to the full text of all requirements and to the guidance on each.
Chapter 1 Introduction
[SWE-001 - Effective Date]
[SWE-002 - Software Engineering Initiative]
[SWE-003 - Center Improvement Plans]
[SWE-004 - OCE Benchmarking]
[SWE-005 - Software Processes]
[SWE-006 - Agency Software Inventory] 

 

 

Unknown macro: {div8}

Chapter 1. Introduction                             

 

 

Chapter 2 - Software Management Requirements
[SWE-013 - Software Plans]
[SWE-130 - Develop a Software Safety Plan]
[SWE-131 - Independent Verification and Validation|SWE-131 - Independent Verification and Validation Project Execution Plan] \\                    [Project Execution Plan|SWE-131 - Independent Verification and Validation Project Execution Plan]
[SWE-014 - Execute Planning]
[SWE-015 - Cost Estimation]
[SWE-016 - Software Schedule]
[SWE-017 - Project and Software Training]
[SWE-018 - Software Activities Review]
[SWE-019 - Software Life Cycle]
[SWE-020 - Software Classification]
[SWE-132 - Independent Software Classification|SWE-132 - Independent Software Classification Assessment] \\                    [Assessment|SWE-132 - Independent Software Classification Assessment]
[SWE-133 - Software Safety Determination]
[SWE-021 - Transition to a Higher Class]
[SWE-022 - Software Assurance]
[SWE-023 - Software Safety]
[SWE-134 - Safety Critical Software Requirements]
[SWE-024 - Plan Tracking]
[SWE-025 - Corrective Actions]
[SWE-026 - Commitment Change Agreements]
[SWE-027 - Use of Commercial, Government, and|SWE-027 - Use of Commercial, Government, and Legacy Software] \\                    [Legacy Software|SWE-027 - Use of Commercial, Government, and Legacy Software]
[SWE-028 - Verification Planning]
[SWE-029 - Validation Planning]
[SWE-030 - Verification Results]
[SWE-031 - Validation Results]
[SWE-032 - CMMI levels for Class A, B, and C|SWE-032 - CMMI levels for Class A, B, and C Software] \\                    [Software|SWE-032 - CMMI levels for Class A, B, and C Software]
[SWE-033 - Acquisition vs. Development|SWE-033 - Acquisition vs. Development Assessment] \\                    [Assessment|SWE-033 - Acquisition vs. Development Assessment]
[SWE-034 - Acceptance Criteria]
[SWE-035 - Supplier Selection]
[SWE-036 - Software Process Determination]
[SWE-037 - Software Milestones]
[SWE-038 - Acquisition Planning]
[SWE-039 - Software Supplier Insight]
[SWE-040 - Access to Software Products]
[SWE-041 - Open Source Software Notification]
[SWE-042 - Source Code Electronic Access]
[SWE-043 - Track Change Request]
[SWE-044 - Supplier Metric Data]
[SWE-045 - Project Participation in Audits]
[SWE-046 - Supplier Software Schedule]
[SWE-047 - Traceability Data]
[SWE-048 - Solicitation]

Unknown macro: {div8}

Chapter 2. Software Management Requirements

Unknown macro: {div8}
Unknown macro: {span}

Chapter 2 full text (NODIS)

 
SWE-013 - Software Plans
SWE-130 - Develop a Software Safety Plan
SWE-131 - Independent Verification and Validation
                   Project Execution Plan
SWE-014 - Execute Planning
SWE-015 - Cost Estimation
SWE-016 - Software Schedule
SWE-017 - Project and Software Training
SWE-018 - Software Activities Review
SWE-019 - Software Life Cycle
SWE-020 - Software Classification
SWE-132 - Independent Software Classification
                   Assessment
SWE-133 - Software Safety Determination
SWE-021 - Transition to a Higher Class
SWE-022 - Software Assurance
SWE-023 - Software Safety
SWE-134 - Safety Critical Software Requirements
SWE-024 - Plan Tracking
SWE-025 - Corrective Actions
SWE-026 - Commitment Change Agreements
SWE-027 - Use of Commercial, Government, and
                   Legacy Software
SWE-028 - Verification Planning
SWE-029 - Validation Planning
SWE-030 - Verification Results
SWE-031 - Validation Results
SWE-032 - CMMI levels for Class A, B, and C
                   Software
SWE-033 - Acquisition vs. Development
                   Assessment
SWE-034 - Acceptance Criteria
SWE-035 - Supplier Selection
SWE-036 - Software Process Determination
SWE-037 - Software Milestones
SWE-038 - Acquisition Planning
SWE-039 - Software Supplier Insight
SWE-040 - Access to Software Products
SWE-041 - Open Source Software Notification
SWE-042 - Source Code Electronic Access
SWE-043 - Track Change Request
SWE-044 - Supplier Metric Data
SWE-045 - Project Participation in Audits
SWE-046 - Supplier Software Schedule
SWE-047 - Traceability Data
SWE-048 - Solicitation

Chapter 3. Software Engineering (Life-Cycle) Requirements

[SWE-049 - Document Software Requirements]
[SWE-050 - Software Requirements]
[SWE-051 - Software Requirements Analysis]
[SWE-052 - Bidirectional Traceability Between Higher|SWE-052 - Bidirectional Traceability Between Higher Level Requirements and Software Requirements] \\                    [Level Requirements & Software Reqmts.|SWE-052 - Bidirectional Traceability Between Higher Level Requirements and Software Requirements]
[SWE-053 - Manage Requirements Changes]
[SWE-054 - Corrective Action for Inconsistencies]
[SWE-055 - Requirements Validation]
[SWE-056 - Document Design]
[SWE-057 - Software Architecture]
[SWE-058 - Detailed Design]
[SWE-059 - Bidirectional Traceability Between Software|SWE-059 - Bidirectional Traceability Between Software Requirements and Software Design] \\                    [Requirements and Software Design|SWE-059 - Bidirectional Traceability Between Software Requirements and Software Design]
[SWE-060 - Coding Software]
[SWE-061 - Coding Standards]
[SWE-135 - Static Analysis]
[SWE-062 - Unit Test]

[SWE-063 - Release Version Description]
[SWE-064 - Bidirectional Traceability Between Software|SWE-064 - Bidirectional Traceability Between Software Design and Software Code] \\                    [Design and Software Code|SWE-064 - Bidirectional Traceability Between Software Design and Software Code]
[SWE-136 - Software Tool Accreditation]
[SWE-065 - Test Plan, Procedures, Reports]
[SWE-066 - Perform Testing]
[SWE-067 - Verify Implementation]
[SWE-068 - Evaluate Test Results]
[SWE-069 - Document Defects and Track]
[SWE-070 - Models, Simulations, Tools]
[SWE-071 - Update Test Plans and Procedures]
[SWE-072 - Bidirectional Traceability Between Software|SWE-072 - Bidirectional Traceability Between Software Test Procedures and Software Requirements] \\                    [Test Procedures and Software Requirements|SWE-072 - Bidirectional Traceability Between Software Test Procedures and Software Requirements]
[SWE-073 - Platform or Hi-Fidelity Simulations]
[SWE-074 - Document Maintenance Plan]
[SWE-075 - Plan Operations, Maintenance,|SWE-075 - Plan Operations, Maintenance, Retirement] \\                     [Retirement|SWE-075 - Plan Operations, Maintenance, Retirement]
[SWE-076 - Implement Operations, Maintenance,|SWE-076 - Implement Operations, Maintenance, and Retirement Activities] \\                    [and Retirement Activities|SWE-076 - Implement Operations, Maintenance, and Retirement Activities]
[SWE-077 - Deliver Software Products]
[SWE-078 - As-built Documentation]

 

 

Chapter 4. Supporting Software Life-Cycle Requirements

[SWE-079 - Develop CM Plan]
[SWE-080 - Track and Evaluate Changes]
[SWE-081 - Identify Software CM Items]
[SWE-082 - Authorizing Changes]
[SWE-083 - Status Accounting]
[SWE-084 - Configuration Audits]
[SWE-085 - Release Management]
[SWE-086 - Continuous Risk Management]
[SWE-087 - Software Peer Reviews and Inspections|SWE-087 - Software Peer Reviews and Inspections for Requirements, Test Plans, Design, and Code] \\                    [for Requirements, Test Plans,|SWE-087 - Software Peer Reviews and Inspections for Requirements, Test Plans, Design, and Code] \\                    [Design, and Code|SWE-087 - Software Peer Reviews and Inspections for Requirements, Test Plans, Design, and Code]
[SWE-137 - Software Peer Reviews and Inspections -|SWE-137 - Software Peer Reviews and Inspections - Peer Reviews and Inspections of Software Plans] \\                    [Peer Reviews and Inspections of|SWE-137 - Software Peer Reviews and Inspections - Peer Reviews and Inspections of Software Plans] \\                    [Software Plans|SWE-137 - Software Peer Reviews and Inspections - Peer Reviews and Inspections of Software Plans]
[SWE-088 - Software Peer Reviews and Inspections -|SWE-088 - Software Peer Reviews and Inspections - Checklist Criteria and Tracking] \\                    [Checklist Criteria and Tracking|SWE-088 - Software Peer Reviews and Inspections - Checklist Criteria and Tracking]
[SWE-089 - Software Peer Reviews and Inspections -|SWE-089 - Software Peer Reviews and Inspections - Basic Measurements] \\                    [Basic Measurements|SWE-089 - Software Peer Reviews and Inspections - Basic Measurements]
[SWE-090 - Measurement Objectives]
[SWE-091 - Measurement Selection]
[SWE-092 - Measurement Collection and Storage]
[SWE-093 - Analysis of Measurement Data]
[SWE-094 - Reporting of Measurement Analysis]
[SWE-095 - Directorate Measurement System]
[SWE-096 - Directorate Measurement Objectives]
[SWE-098 - Agency PAL]
[SWE-099 - Center PAL Reviews]
[SWE-100 - Software Training Funding]
[SWE-101 - Center SW Training Plans|SWE-101 - Center SW Training Plans]

 

Chapter 5. Software Documentation Requirements
[SWE-102 - SW Development-Management Plan]
[SWE-103 - Software CM Plan]
[SWE-104 - Software Test Plan]
[SWE-105 - Software Maintenance Plan]
[SWE-106 - Software Assurance Plan]
[SWE-107 - SW Training Plan Contents]
[SWE-108 - Center SW Improvement Plan]
[SWE-138 - Software Safety Plan Contents]
[SWE-109 - Software Requirements Specification]
[SWE-110 - Software Data Dictionary]
[SWE-111 - Software Design Description]
[SWE-112 - Interface Design Description]
[SWE-113 - SW Change Request_Problem Report]
[SWE-114 - Software Test Procedures]
[SWE-115 - Software User Manual]
[SWE-116 - Software Version Description]
[SWE-117 - Software Metrics Report]
[SWE-118 - Software Test Report]
[SWE-119 - Software Documentation Reqmts. -|SWE-119 - Software Documentation Requirements - Software Inspection, Peer Reviews, Inspections] \\                    [Software Inspection, Peer Reviews,|SWE-119 - Software Documentation Requirements - Software Inspection, Peer Reviews, Inspections] \\                    [Inspections|SWE-119 - Software Documentation Requirements - Software Inspection, Peer Reviews, Inspections]
Chapter 6. Tailoring, Engineering Technical Authority, and Compliance Measurement
[SWE-120 - General Exclusion from Requirements]
[SWE-121 - Document Alternate Requirements]
[SWE-122 - Technical Authority Appointment]
[SWE-124 - ETA OCE Compliance]
[SWE-125 - Requirements Compliance Matrix]
[SWE-126 - Waiver and Deviation Considerations]
[SWE-139 - Shall Statements]
[SWE-140 - Partial Center (P(Center)) Requirements]
[SWE-127 - P (Center) OCE Concurrence]
[SWE-128 - Technical Authority Records]
[SWE-129 - OCE NPR Appraisals]

 

 

 

 

  • No labels