1. Requirements

4.4.5 The project shall report measurement analysis results periodically and allow access to measurement information by Center-defined organizational measurement programs.

1.1 Notes

NPR 7150.2A does not include any notes for this requirement.

1.2 Applicability Across Classes

Classes C-E and Safety Critical are labeled "P (Center) +SO". This means that this requirement applies to the safety-critical aspects of the software and that an approved Center defined process which meets a non-empty subset of this full requirement can be used to meet the intent of this requirement.

Class C and Not Safety Critical and Class G are labeled with "P (Center)". This means that a Center defined process which meets a non-empty subset of this full requirement can be used to meet the intent of this requirement.

Class F is labeled with "X (not OTS)". This means that this requirement does not apply to off-the-shelf software for these classes.

Key:    A_SC = Class A Software, Safety-Critical | A_NSC = Class A Software, Not Safety-Critical | ... | - Applicable | - Not Applicable
^X - Applicable with details, read above for more | P(C) - P(Center), follow center requirements or procedures

2. Rationale

add

3. Guidance

add

4. Small Projects

add

5. Resources

1. add
2. add

6. Lessons Learned

add